NSN 5305-01-652-8608
High Torque Screw
Drilled shank.
Manufacturer part number NAS1994-9DT for national stock number 5305016528608.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-652-8608.
-
MPN or Model
NAS1994-9DT
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
096640 - Screws, Iron Or Steel -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.425 inches -
Fastener Length
Between 0.972 inches and 1.002 inches -
Head Style
Flat countersunk -
Grip Diameter
Between 0.248 inches and 0.249 inches -
Internal Drive Style
High-torque -
End Application
Various c5 -
Thread Diameter
0.250 inches -
Grip Length
Between 0.552 inches and 0.572 inches -
Thready Qty Per Inch (tpi)
28 -
Countersink Angle
100.0 degrees -
Part Name Assigned By Controlling Agency
Bolt flat reduced head -
Material
Steel comp 4140 or steel comp 4340 or steel comp 8740 -
Surface Treatment
Cadmium -
Thread Series Designator
Unjf
More from these suppliers
- 5305-00-005-3386 MPN NAS1100-06-12BMachine Screw
- 5305-00-021-4078 MPN NAS1221-3-3Machine Screw
- 5305-00-038-6682 MPN NAS1581F3H4Close Tolerance Screw
- 5305-00-057-0510 MPN MS51958-13Machine Screw
- 5305-00-074-4437 MPN NAS623-3-50Machine Screw
- 5305-00-205-3463 MPN NAS1351-4H10Socket Head Cap Screw
- 5305-00-209-3162 MPN NAS1741C04R3Socket Head Cap Screw
- 5305-00-271-3475 MPN NAS224-26Machine Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-652-8608 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS1994-9DT | National Aerospace Standards |