NSN 5305-01-656-1215
High Torque Screw
Between 1.412 inches and 1.442 inches fastener length, flat countersunk head style, 0.328 inches head diameter, spline major diameter: 0.155 inches .
Manufacturer part number NAS5315E3-14 for national stock number 5305016561215.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-656-1215.
-
MPN or Model
NAS5315E3-14
-
NMF (National Motor Freight)
096640 - Screws, Iron Or Steel -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.276 inches -
Fastener Length
Between 1.412 inches and 1.442 inches -
Head Style
Flat countersunk -
Head Diameter
0.328 inches -
Spline Major Diameter
0.155 inches -
Grip Diameter
Between 0.1885 inches and 0.1895 inches -
Internal Drive Style
Torx -
Thread Diameter
0.1900 inches -
Grip Length
Between 0.865 inches and 0.885 inches -
Thready Qty Per Inch (tpi)
32 -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Part Name Assigned By Controlling Agency
Screw, shear -
Material
Stainless steel -
Material Specification
Ams5731 assn standard single material response or ams5732 assn standard single material response or ams5737 assn standard single material response or ams5853 assn standard single material response -
Surface Treatment
Passivate -
Surface Treatment Specification
Ams2700, method 1, class 4 assn standard single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5940-01-451-2572 MPN NAS1063A3-504AJTerminal Board Marker Strip
- 5305-00-059-3666 MPN MS51958-70Machine Screw
- 5305-00-104-7537 MPN NAS1189-04P6LSocket Head Cap Screw
- 5305-00-119-7448 MPN NAS1635-08LL16Socket Head Cap Screw
- 5305-00-160-0240 MPN NASM51958Machine Screw
- 5305-00-174-0712 MPN MS24693-50Machine Screw
- 5305-00-211-9162 MPN NAS1218-3-27Machine Screw
- 5305-00-234-9732 MPN NAS1190C4P8NSocket Head Cap Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-656-1215 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS5315E3-14 | National Aerospace Standards |