NSN 5305-01-657-5206
High Torque Screw
Between 0.673 inches and 0.703 inches fastener length, flat countersunk head style, between 0.578 inches and 0.633 inches head diameter, grip diameter: between 0.311 inches and 0.312 inches .
Manufacturer part number NAS1580C5H3 for national stock number 5305016575206.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-657-5206.
-
MPN or Model
NAS1580C5H3
-
NMF (National Motor Freight)
096630 - Screws NOI Brass/bronze/copper -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.501 inches -
Fastener Length
Between 0.673 inches and 0.703 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.578 inches and 0.633 inches -
Grip Diameter
Between 0.311 inches and 0.312 inches -
Internal Drive Style
High-torque -
End Application
A10 -
Thread Diameter
0.3125 inches -
Grip Length
Between 0.177 inches and 0.197 inches -
Thready Qty Per Inch (tpi)
14 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Part Name Assigned By Controlling Agency
Bolt 100 degree flush head -
Material
Iron alloy 660 -
Surface Treatment
Passivate -
Thread Series Designator
Unjf
More from these suppliers
- 5940-01-425-6041 MPN NAS1063A5-436Terminal Board Marker Strip
- 5305-00-071-1322 MPN MS51960-65Machine Screw
- 5305-00-081-2651 MPN MS51038-15Setscrew
- 5305-00-108-9791 MPN NAS601-38Machine Screw
- 5305-00-111-0720 MPN NAS1102-3-32Machine Screw
- 5305-00-134-8578 MPN NAS1402-3WMachine Screw
- 5305-00-144-9831 MPN NAS1218-06-9Machine Screw
- 5305-00-202-1952 MPN NAS1081-08D6Setscrew
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-657-5206 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS1580C5H3 | National Aerospace Standards |