NSN 5306-01-615-9718
Coaxial Connector
Undrilled and nonlocking, cadmium plated; dwg under nas60203 thru 6220, nas6206-72d for pn nas6206-78.
Manufacturer part number NAS6206-78 for national stock number 5306016159718.
Datasheet
-
Product description
Shear Bolt NSN 5306-01-615-9718.
-
MPN or Model
NAS6206-78
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3 -
Thread Direction
Right-hand -
Thread Length
0.454 inches -
Fastener Length
5.329 inches -
Head Style
Hexagon -
Head Height
0.188 inches -
Width Between Flats
0.559 inches -
Grip Diameter
0.374 inches -
Thread Diameter
0.375 inches -
Grip Length
4.875 inches -
Thready Qty Per Inch (tpi)
24 -
Min. Tensile Strength (psi)
160 pounds per square inch -
Material
Steel comp 4140 -
Surface Treatment
Cadmium -
Thread Series Designator
Unjf
More from these suppliers
- 5940-00-836-0091 MPN NAS705G3Stud Terminal
- 5305-00-038-2437 MPN NAS514P832-9Machine Screw
- 5305-00-038-6682 MPN NAS1581F3H4Close Tolerance Screw
- 5305-00-053-8077 MPN MS24677-104Socket Head Cap Screw
- 5305-00-059-3673 MPN NAS1635-4-6Machine Screw
- 5305-00-079-2589 MPN NAS1154-11Close Tolerance Screw
- 5305-00-087-9651 MPN MS24678-26CSocket Head Cap Screw
- 5305-00-142-4676 MPN NAS1635-06-22Machine Screw
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-01-615-9718 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS6206-78 | National Aerospace Standards |
Stock Check
- NE: 137
- NS: 1