NSN 5930-01-014-9669
Digiswitch
Section 5 in special case marked ".".
Manufacturer part number 08-R-0177 for national stock number 5930010149669.
Datasheet
-
Product description
Code Indicating Wheel Switch NSN 5930-01-014-9669.
-
MPN or Model
08-R-0177
-
Schedule B
8536.50.9065 (Switches, for a voltage not exceeding 1000 volts, nesoi) -
NMF (National Motor Freight)
061300 - Circuit Breaker/switch NOI -
Hazardous Locations/environmental Protection
Dustproof -
Overall Length
5.030 inches -
Overall Height
1.885 inches -
Overall Width
1.150 inches -
Unthreaded Mounting Hole Diameter
0.100 inches single mounting facility -
Individual Section Quantity
8 -
Longest Horizontal Distance Between Mounting Centers
4.860 inches single mounting facility -
Longest Vertical Distance Between Mounting Centers
0.900 inches single mounting facility -
Mounting Method
Unthreaded hole single mounting facility -
Actuator Type
Thumbwheel all actuators -
Contact Voltage Rating In Volts
28.0 dc at sea level -
Mounting Facility Pattern
Four position rectangular single mounting facility -
Switch Actuator Indexing Position Quantity
10 all actuators -
Terminal Type
Printed circuit -
Contact Load Current Rating
125.0 milliamperes resistive load dc at sea level -
Readout Indicator Marking
0, 1, 2, 3, 4, 5, 6, 7, 8, 9 each section -
Contact Arrangement Truth Table
Bcd, 1 pole - 10 positions each section -
Color
White each indicator marking -
Precious Material And Location
Contact surfaces gold -
Precious Material
Gold -
Style Designator
Rectangular inline indicating
More from these suppliers
- 5930-01-055-4311 MPN 07-P-0070Switch Assembly
- 5930-01-084-5624 MPN 9-R-98Switch Assembly
- 5930-01-368-8876 MPN 7-S-516Code Indicating Wheel Switch
- 5930-01-454-7018 MPN 64-E-2-REV BCode Indicating Wheel Switch
- 5930-01-112-0717 MPN 7-R-209Code Indicating Wheel Switch
- 5985-01-444-5389 MPN 3036726-101Antenna Elevator Group
A switch which is externally actuated by a thumbwheel and/or pushbutton. A legend or message is visually displayed at each position of the indicating wheel which corresponds to electrically coded output. Electrically coded output is achieved by rotating a set of brush contacts permanently attached to the code indicating wheel, against a stationary commutator which is usually a printed wiring board having electrical pads or contacts which are interconnected by the rotating brush contacts. May have additional electrical components (such as resistors, capacitors, diodes) premounted on that portion of printed wiring board which extends beyond the back of switch housing.
Pricing and Availability
Get a quote for 5930-01-014-9669 code indicating wheel switchManufacturer Part Numbers and Alternates
| MPN manufacturer part number | Registrant or Supplier |
|---|---|
| 08-R-0177 | Electro Switch Corp. |
| 127720-011 | Harris Corporation |
| 8-R-177 | Electro Switch Corp. |
| TBD | Electro Switch Corp. |
Stock Check
