NSN 5930-01-097-4428
Digiswitch
One increase and one decrease pushbutton panel seal gasket provided.
Manufacturer part number M22710/18-1S3B for national stock number 5930010974428.
Datasheet
-
Product description
Code Indicating Wheel Switch NSN 5930-01-097-4428.
-
MPN or Model
M22710/18-1S3B
-
Schedule B
8536.50.9065 (Switches, for a voltage not exceeding 1000 volts, nesoi) -
NMF (National Motor Freight)
061300 - Circuit Breaker/switch NOI -
Unit Weight (Est.)
0.1 lb -
Thread Class
2b single mounting facility -
Hazardous Locations/environmental Protection
Dustproof and explosion proof -
Overall Length
0.580 inches -
Overall Height
1.695 inches -
Overall Width
1.687 inches -
Distance Between Mounting Facility Centers
1.437 inches single mounting facility -
Individual Section Quantity
1 -
Operating Tempurature Range
-65.0/+125.0 degrees celsius -
Mounting Method
Flange single mounting facility and threaded hole single mounting facility -
Actuator Type
Push button all actuators -
Thready Qty Per Inch (tpi)
56 single mounting facility -
Thread Size
0.086 inches single mounting facility -
Contact Voltage Rating In Volts
28.0 dc at sea level -
Mounting Facility Pattern
Two position in-line single mounting facility -
Switch Actuator Indexing Position Quantity
8 all actuators -
Terminal Type
Printed circuit -
Contact Load Current Rating
125.0 milliamperes resistive load dc at sea level -
Readout Indicator Marking
0, 1, 2, 3, 4, 5, 6, 7 single section -
Contact Arrangement Truth Table
Bcd, 1 pole - 8 positions single section -
Color
White single indicator marking -
Style Designator
Rectangular indicating -
Test Data Document
81349-mil-s-22710 specification (includes engineering type bulletins, brochures, etc., that reflect specification type data in specification format; excludes commercial catalogs, industry directories, and similar trade publications, reflecting general type data on certain environmental and performance requirements and test conditions that are shown as "typical", "average", "", etc.). -
Thread Series Designator
Unc single mounting facility -
Specification Data
81349-mil-s-22710/18 government specification
More from these suppliers
- 5905-00-001-5834 MPN RNC60K1004FRFilm Fixed Resistor
- 5905-00-004-6052 MPN MIL-R-39009/1Inductive Wire Wound Fixed Resistor
- 5905-00-005-2913 MPN RW74U2002BInductive Wire Wound Fixed Resistor
- 5905-00-006-5493 MPN MILR55182-3Film Fixed Resistor
- 5905-00-006-6941 MPN RN60E4643BFilm Fixed Resistor
- 5935-00-006-7149 MPN M83723/02R2461WElectrical Receptacle Connector
- 5905-00-006-9065 MPN RLR05C513GPFilm Fixed Resistor
- 4820-00-010-6118 MPN MILV24332Safety Relief Valve
A switch which is externally actuated by a thumbwheel and/or pushbutton. A legend or message is visually displayed at each position of the indicating wheel which corresponds to electrically coded output. Electrically coded output is achieved by rotating a set of brush contacts permanently attached to the code indicating wheel, against a stationary commutator which is usually a printed wiring board having electrical pads or contacts which are interconnected by the rotating brush contacts. May have additional electrical components (such as resistors, capacitors, diodes) premounted on that portion of printed wiring board which extends beyond the back of switch housing.
Pricing and Availability
Get a quote for 5930-01-097-4428 code indicating wheel switchManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
M22710/18-1S3B | Military Specifications |
MIL-DTL-22710/18 | Military Specifications |
2808B-A1BSP | Janco Corporation |