NSN 5930-01-114-0769
Digiswitch
Explosion proof and moisture resistant hazardous locations/environmental protection, -65.0/+85.0 degrees celsius operating tempurature range, thumbwheel all actuators actuator type, contact voltage rating in volts: 28.0 dc at sea level.
Manufacturer part number M22710/15-123 for national stock number 5930011140769.
Datasheet
-
Product description
Code Indicating Wheel Switch NSN 5930-01-114-0769.
-
MPN or Model
M22710/15-123
-
Schedule B
8536.50.9065 (Switches, for a voltage not exceeding 1000 volts, nesoi) -
NMF (National Motor Freight)
061300 - Circuit Breaker/switch NOI -
Unit Weight (Est.)
0.3 lb -
Hazardous Locations/environmental Protection
Explosion proof and moisture resistant -
Overall Length
2.260 inches -
Overall Height
1.780 inches -
Overall Width
1.150 inches -
Unthreaded Mounting Hole Diameter
0.100 inches single mounting facility -
Individual Section Quantity
3 -
Longest Horizontal Distance Between Mounting Centers
2.090 inches single mounting facility -
Longest Vertical Distance Between Mounting Centers
0.900 inches single mounting facility -
Operating Tempurature Range
-65.0/+85.0 degrees celsius -
End Application
4930-01-074-3377 test set fire contr -
Mounting Method
Bracket single mounting facility and unthreaded hole single mounting facility -
Actuator Type
Thumbwheel all actuators -
Contact Voltage Rating In Volts
28.0 dc at sea level -
Mounting Facility Pattern
Four position rectangular single mounting facility -
Switch Actuator Indexing Position Quantity
8 all actuators -
Terminal Type
Printed circuit -
Contact Load Current Rating
125.0 milliamperes resistive load dc at sea level -
Readout Indicator Marking
0, 1, 2, 3, 4, 5, 6, 7 each section -
Contact Arrangement Truth Table
Bcd with complement, 2 pole - 8 positions each section -
Color
White each indicator marking -
Style Designator
Rectangular inline indicating -
Test Data Document
81349-mil-s-22710 specification (includes engineering type bulletins, brochures, etc., that reflect specification type data in specification format; excludes commercial catalogs, industry directories, and similar trade publications, reflecting general type data on certain environmental and performance requirements and test conditions that are shown as "typical", "average", "", etc.). -
Specification Data
81349-mil-s-22710/15 government specification
More from these suppliers
- 5935-00-003-7629 MPN MIL-C-26482Electrical Receptacle Connector
- 5905-00-006-1289 MPN RNC60H5231FMFilm Fixed Resistor
- 5905-00-013-9444 MPN MIL-R-93/5Noninductive Wire Wound Fixed Resistor
- 5905-00-024-0547 MPN RNC55E3011FPFilm Fixed Resistor
- 5945-00-025-7232 MPN MIL-R-5757/29Reed Relay
- 5905-00-038-5916 MPN MILR39007-6Wire Wound Fixed Resistor
- 5905-00-043-0375 MPN MIL-R-26/4Inductive Wire Wound Fixed Resistor
- 5905-00-043-3565 MPN MIL-R-93/10Noninductive Wire Wound Fixed Resistor
A switch which is externally actuated by a thumbwheel and/or pushbutton. A legend or message is visually displayed at each position of the indicating wheel which corresponds to electrically coded output. Electrically coded output is achieved by rotating a set of brush contacts permanently attached to the code indicating wheel, against a stationary commutator which is usually a printed wiring board having electrical pads or contacts which are interconnected by the rotating brush contacts. May have additional electrical components (such as resistors, capacitors, diodes) premounted on that portion of printed wiring board which extends beyond the back of switch housing.
Pricing and Availability
Get a quote for 5930-01-114-0769 code indicating wheel switchManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
M22710/15-123 | Military Specifications |
MIL-S-22710/15 | Military Specifications |