NSN 5930-01-141-5368
Actuator Boot
About this product
1 mounting devices, between 0.461 inches and 0.472 inches opening inside diameter, rubber silicone body material, style designator: thru-hole.
Manufacturer part number M5423/16-1 for national stock number 5930011415368.
Datasheet
-
Product description
Dust And Moisture Seal Boot NSN 5930-01-141-5368.
-
MPN or Model
M5423/16-1
-
Schedule B
8538.90.7080 (Parts suitable for use solely or principally with the apparatus for heading 8535, 8536, 8537, nesoi) -
NMF (National Motor Freight)
063250 - Break Switches Air -
Unit Weight (Est.)
0.1 lb -
Overall Height
Between 0.105 inches and 0.120 inches -
Mounting Device Quantity
1 -
Body Outside Diameter
Between 0.650 inches and 0.677 inches -
Mounting Method
Threaded hole -
Opening Inside Diameter
Between 0.461 inches and 0.472 inches -
Material
Rubber silicone body -
Style Designator
Thru-hole -
Test Data Document
81349-mil-b-5423 specification (includes engineering type bulletins, brochures, etc., that reflect specification type data in specification format; excludes commercial catalogs, industry directories, and similar trade publications, reflecting general type data on certain environmental and performance requirements and test conditions that are shown as "typical", "average", "", etc.). -
Specification Data
81349-mil-b-5423/16 government specification
More from these suppliers
- 5950-00-016-4927 MPN 77C707988PT1Reactor
- 5950-00-581-5761 MPN 7423241P001Radio Frequency Coil
- 5945-00-643-7719 MPN CR2824-41LThermal Relay
- 5940-00-727-5162 MPN 77C04732P004Stud Terminal
- 5930-00-936-5943 MPN 77C708730P001Liquid Flow Switch
- 5950-00-938-3510 MPN 77C709274-1Radio Frequency Transformer
- 5950-00-991-0759 MPN 77C705448G1Power Transformer
- 5905-00-993-0264 MPN 77C707892PT6Film Fixed Resistor
Dust And Moisture Seal Boot
A flexible, nonmetallic item designed to prevent entry of dust, moisture and other contaminants into critical areas around shafts, levers, electrical wires and hoses. Sealing may be either static or dynamic. The item may include mounting hardware (support plates, clamps and the like). Excludes bellows, protection; grommet, nonmetallic; and cable nipple, electrical. See also cap, electrical; cap, protective, dust and moisture seal; and shield, electrical connector.
Pricing and Availability
Get a quote for 5930-01-141-5368 dust and moisture seal bootManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
M5423/16-1 | Military Specifications |
M5423/16 | Military Specifications |
M5423/16-001 | Military Specifications |
M5423/16A | Military Specifications |
M5423/16-01 | Military Standards |
M5423/16-1 | Military Standards |
MS25196/32-341 | Military Standards |
M5423/16-01 | Military Specifications |
MIL-B-5423/16 | Military Specifications |
437-6726903-7 | Naval Sea Systems Command |
531-6985692 PN 009 | Naval Sea Systems Command |
703-7069236-4 | Naval Sea Systems Command |
H655-1310- PN 009 | Electric Boat Corporation |
5180-9615 ITEM 33 | Johns Hopkins University Applied |
5180-9715 ITEM 33 | Johns Hopkins University Applied |
5180-9815 ITEM 33 | Johns Hopkins University Applied |
0561C0029 | Lockheed Martin Corporation |
M5423/16-01 | Naval Sea Systems Command |
1426A-1-1-11.2 | Winchester Electronics Corporation |
32-341 | Labinal, Llc |
32-341-20PSI | Labinal, Llc |
TS10368 | Honeywell International Inc. |
457-5864 | Nimikkeistokeskus Ncb Finland |
5330005746704 | E.c.a Etablissement |
MIL-DTL-5423/16 | Military Specifications |
Stock Check
Availability for this item was last checked on 01/12/23.
The quantities and conditions available at the time were:
- NE: 252
- NS: 151
- SV: 1