NSN 5930-01-190-6628
Digiswitch
Decimal point between second an third section.
Manufacturer part number 101BC12701 for national stock number 5930011906628.
Datasheet
-
Product description
Code Indicating Wheel Switch NSN 5930-01-190-6628.
-
MPN or Model
101BC12701
-
Schedule B
8536.50.9065 (Switches, for a voltage not exceeding 1000 volts, nesoi) -
NMF (National Motor Freight)
061300 - Circuit Breaker/switch NOI -
Unit Weight (Est.)
0.1 lb -
Overall Length
Between 3.240 inches and 3.290 inches -
Overall Height
2.425 inches -
Overall Width
1.146 inches -
Unthreaded Mounting Hole Diameter
0.100 inches single mounting facility -
Individual Section Quantity
5 -
Longest Horizontal Distance Between Mounting Centers
3.070 inches single mounting facility and 3.110 inches single mounting facility -
Longest Vertical Distance Between Mounting Centers
0.900 inches single mounting facility -
End Application
4920-01-111-2981 automatic test sa/mme-pd-434 -
Mounting Method
Bracket single mounting facility and unthreaded hole single mounting facility -
Actuator Type
Lever all actuators -
Contact Voltage Rating In Volts
115.0 dc at sea level -
Mounting Facility Pattern
Four position rectangular single mounting facility -
Switch Actuator Indexing Position Quantity
10 single actuator -
Terminal Type
Pin and printed circuit -
Contact Load Current Rating
125.0 milliamperes resistive load dc at sea level -
Readout Indicator Marking
0, 1, 2, 3, 4, 5, 6, 7, 8, 9 each section -
Contact Arrangement Truth Table
Bcd, 1 pole - 10 positions each section -
Color
White each indicator marking -
Style Designator
Rectangular inline indicating
More from these suppliers
- 5930-01-185-6824 MPN E79-40APush Switch
- 5930-01-157-9660 MPN S27-1Switch Assembly
- 5905-01-444-4404 MPN RF50-00511Film Fixed Resistor
- 5945-01-444-9638 MPN SEP0-20202Electromagnetic Relay
A switch which is externally actuated by a thumbwheel and/or pushbutton. A legend or message is visually displayed at each position of the indicating wheel which corresponds to electrically coded output. Electrically coded output is achieved by rotating a set of brush contacts permanently attached to the code indicating wheel, against a stationary commutator which is usually a printed wiring board having electrical pads or contacts which are interconnected by the rotating brush contacts. May have additional electrical components (such as resistors, capacitors, diodes) premounted on that portion of printed wiring board which extends beyond the back of switch housing.
Pricing and Availability
Get a quote for 5930-01-190-6628 code indicating wheel switchManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
101BC12701 | Giga-tronics Incorporated |
L20F-42MJ | Datex Instruments Inc. |
L20F-42MJ | Cherry Electrical Products Corp |