NSN 5930-01-220-9681
Digiswitch
Shock resistant and vibration resistant hazardous locations/environmental protection, thumbwheel all actuators actuator type, 240.0 dc at sea level contact voltage rating in volts, mounting facility pattern: four position rectangular single mounting facility.
Manufacturer part number T20-03MH for national stock number 5930012209681.
Datasheet
-
Product description
Code Indicating Wheel Switch NSN 5930-01-220-9681.
-
MPN or Model
T20-03MH
-
Schedule B
8536.50.9065 (Switches, for a voltage not exceeding 1000 volts, nesoi) -
NMF (National Motor Freight)
061300 - Circuit Breaker/switch NOI -
Hazardous Locations/environmental Protection
Shock resistant and vibration resistant -
Overall Length
2.260 inches -
Overall Height
1.665 inches -
Overall Width
1.146 inches -
Unthreaded Mounting Hole Diameter
0.100 inches single mounting facility -
Individual Section Quantity
3 -
Longest Horizontal Distance Between Mounting Centers
2.090 inches single mounting facility -
Longest Vertical Distance Between Mounting Centers
0.900 inches single mounting facility -
Mounting Method
Bracket and unthreaded hole single mounting facility -
Actuator Type
Thumbwheel all actuators -
Contact Voltage Rating In Volts
240.0 dc at sea level -
Mounting Facility Pattern
Four position rectangular single mounting facility -
Switch Actuator Indexing Position Quantity
4 1st actuator -
Terminal Type
Printed circuit -
Contact Load Current Rating
500.0 milliamperes resistive load dc at sea level -
Readout Indicator Marking
0, 1, 2, 3, 4, 5, 6, 7, 8, 9 3rd section -
Contact Arrangement Truth Table
Bcd, 1 pole - 10 positions each section -
Color
White each indicator marking -
Precious Material And Location
Printed circuit board surfaces gold -
Precious Material
Gold -
Style Designator
Rectangular inline indicating
More from these suppliers
- 5930-01-077-7780 MPN E62-23HMCherry Switch
A switch which is externally actuated by a thumbwheel and/or pushbutton. A legend or message is visually displayed at each position of the indicating wheel which corresponds to electrically coded output. Electrically coded output is achieved by rotating a set of brush contacts permanently attached to the code indicating wheel, against a stationary commutator which is usually a printed wiring board having electrical pads or contacts which are interconnected by the rotating brush contacts. May have additional electrical components (such as resistors, capacitors, diodes) premounted on that portion of printed wiring board which extends beyond the back of switch housing.
Pricing and Availability
Get a quote for 5930-01-220-9681 code indicating wheel switchManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
T20-03MH | Cherry Electrical Products Corp |