NSN 5930-01-243-9197
Digiswitch
Thumbwheel all actuators actuator type, 28.0 dc at sea level contact voltage rating in volts, four position rectangular single mounting facility mounting facility pattern, switch actuator indexing position quantity: 2 1st actuator.
Manufacturer part number 07-B-0287 for national stock number 5930012439197.
Datasheet
-
Product description
Code Indicating Wheel Switch NSN 5930-01-243-9197.
-
MPN or Model
07-B-0287
-
Schedule B
8536.50.9065 (Switches, for a voltage not exceeding 1000 volts, nesoi) -
Overall Length
2.260 inches -
Overall Height
1.250 inches -
Overall Width
1.150 inches -
Unthreaded Mounting Hole Diameter
0.100 inches single mounting facility -
Individual Section Quantity
2 -
Mounting Method
Unthreaded hole single mounting facility -
Actuator Type
Thumbwheel all actuators -
Contact Voltage Rating In Volts
28.0 dc at sea level -
Mounting Facility Pattern
Four position rectangular single mounting facility -
Switch Actuator Indexing Position Quantity
2 1st actuator -
Terminal Type
Tab, solder lug -
Contact Load Current Rating
125.0 milliamperes resistive load dc at sea level -
Readout Indicator Marking
0, 1, 2, 3, 4, 5, 6, 7, 8, 9 2nd section -
Contact Arrangement Truth Table
Bcd, 1 pole - 10 positions 2nd section -
Style Designator
Rectangular indicating
More from these suppliers
- 5930-01-024-4379 MPN 9-R-80Code Indicating Wheel Switch
- 5930-01-126-4962 MPN 7M273FSwitch Assembly
- 5930-01-159-9925 MPN 12-C-9Code Indicating Wheel Switch
- 5930-01-183-6261 MPN 53-B-0013Code Indicating Wheel Switch
- 5930-01-222-2232 MPN 710-2Code Indicating Wheel Switch
- 5930-01-382-1323 MPN 53-A-0010Push Switch
- 5930-01-378-6422 MPN 53-A-0007Push Switch
- 5930-01-112-0717 MPN 7-R-209Code Indicating Wheel Switch
A switch which is externally actuated by a thumbwheel and/or pushbutton. A legend or message is visually displayed at each position of the indicating wheel which corresponds to electrically coded output. Electrically coded output is achieved by rotating a set of brush contacts permanently attached to the code indicating wheel, against a stationary commutator which is usually a printed wiring board having electrical pads or contacts which are interconnected by the rotating brush contacts. May have additional electrical components (such as resistors, capacitors, diodes) premounted on that portion of printed wiring board which extends beyond the back of switch housing.
Pricing and Availability
Get a quote for 5930-01-243-9197 code indicating wheel switchManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
07-B-0287 | Electro Switch Corp. |
N7-B-287 | Electro Switch Corp. |