NSN 5930-01-343-0844
Digiswitch
-65.0/+125.0 degrees celsius operating tempurature range, 56 single mounting facility thready qty per inch (tpi), 28.0 dc at sea level contact voltage rating in volts, mounting facility pattern: two position in-line single mounting facility.
Manufacturer part number 2810BA-1BLCSP for national stock number 5930013430844.
Datasheet
-
Product description
Code Indicating Wheel Switch NSN 5930-01-343-0844.
-
MPN or Model
2810BA-1BLCSP
-
Schedule B
8536.50.9065 (Switches, for a voltage not exceeding 1000 volts, nesoi) -
NMF (National Motor Freight)
061300 - Circuit Breaker/switch NOI -
Unit Weight (Est.)
0.1 lb -
Thread Class
2b single mounting facility -
Overall Height
1.645 inches -
Distance Between Mounting Facility Centers
1.437 inches single mounting facility -
Individual Section Quantity
1 -
Operating Tempurature Range
-65.0/+125.0 degrees celsius -
Mounting Method
Flange single mounting facility and threaded hole single mounting facility -
Thready Qty Per Inch (tpi)
56 single mounting facility -
Thread Size
0.086 inches single mounting facility -
Contact Voltage Rating In Volts
28.0 dc at sea level -
Mounting Facility Pattern
Two position in-line single mounting facility -
Switch Actuator Indexing Position Quantity
10 single actuator -
Terminal Type
Printed circuit -
Contact Load Current Rating
50.0 milliamperes inductive load dc at sea level and 125.0 milliamperes resistive load dc at sea level -
Style Designator
Rectangular indicating -
Thread Series Designator
Unc single mounting facility
More from these suppliers
- 5930-00-126-3428 MPN 77-1991Rotary Switch
- 5930-00-182-7403 MPN 4M36EB2-2N5Rotary Switch
- 5930-01-009-8526 MPN 2415Rotary Switch
- 5930-01-018-2342 MPN 4M36F1-2N7Rotary Switch
- 5930-01-037-8256 MPN 4M30F1-5N8Rotary Switch
- 5930-01-237-6911 MPN 87-1929-57Rotary Switch
- 5930-01-519-2890 MPN 26142Rotary Switch
A switch which is externally actuated by a thumbwheel and/or pushbutton. A legend or message is visually displayed at each position of the indicating wheel which corresponds to electrically coded output. Electrically coded output is achieved by rotating a set of brush contacts permanently attached to the code indicating wheel, against a stationary commutator which is usually a printed wiring board having electrical pads or contacts which are interconnected by the rotating brush contacts. May have additional electrical components (such as resistors, capacitors, diodes) premounted on that portion of printed wiring board which extends beyond the back of switch housing.
Pricing and Availability
Get a quote for 5930-01-343-0844 code indicating wheel switchManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
2810BA-1BLCSP | Janco Corporation |