NSN 5930-01-367-8000
Digiswitch
Thumbwheel all actuators actuator type, 28.0 ac at sea level28.0 dc at sea level contact voltage rating in volts, six position rectangular single mounting facility mounting facility pattern, switch actuator indexing position quantity: 8 all actuators.
Manufacturer part number 935245-11 for national stock number 5930013678000.
Datasheet
-
Product description
Code Indicating Wheel Switch NSN 5930-01-367-8000.
-
MPN or Model
935245-11
-
Schedule B
8536.50.9065 (Switches, for a voltage not exceeding 1000 volts, nesoi) -
NMF (National Motor Freight)
061300 - Circuit Breaker/switch NOI -
Overall Length
3.940 inches -
Overall Height
1.755 inches -
Overall Width
1.980 inches -
Unthreaded Mounting Hole Diameter
0.124 inches single mounting facility -
Individual Section Quantity
6 -
Mounting Method
Unthreaded hole single mounting facility -
Actuator Type
Thumbwheel all actuators -
Contact Voltage Rating In Volts
28.0 ac at sea level28.0 dc at sea level -
Mounting Facility Pattern
Six position rectangular single mounting facility -
Switch Actuator Indexing Position Quantity
8 all actuators -
Terminal Type
Tab, solder lug -
Contact Load Current Rating
3.000 amperes resistive load ac at sea level3.000 amperes resistive load dc at sea level -
Color
Black each bodywhite each indicator marking -
Style Designator
Rectangular inline indicating
More from these suppliers
- 5940-00-052-1211 MPN 861021-27Grounding Metallic Shielded Cable Ferrule
- 5945-00-070-7960 MPN 900037-212Electromagnetic Relay
- 5935-00-118-7867 MPN 952494-9Tip Jack
- 5905-00-137-7191 MPN 947987-5760Film Fixed Resistor
- 5905-00-139-1653 MPN 912098-65Film Fixed Resistor
- 5905-00-256-9464 MPN 912113-43Noninductive Wire Wound Fixed Resistor
- 5935-00-411-3652 MPN 924399-1Electrical Receptacle Connector
- 5905-00-412-0557 MPN 912115-107Noninductive Wire Wound Fixed Resistor
A switch which is externally actuated by a thumbwheel and/or pushbutton. A legend or message is visually displayed at each position of the indicating wheel which corresponds to electrically coded output. Electrically coded output is achieved by rotating a set of brush contacts permanently attached to the code indicating wheel, against a stationary commutator which is usually a printed wiring board having electrical pads or contacts which are interconnected by the rotating brush contacts. May have additional electrical components (such as resistors, capacitors, diodes) premounted on that portion of printed wiring board which extends beyond the back of switch housing.
Pricing and Availability
Get a quote for 5930-01-367-8000 code indicating wheel switchManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
935245-11 | Northrop Grumman Systems Corporation |
07-L-0299 | Electro Switch Corp. |
7-L-299 | Electro Switch Corp. |