NSN 5305-01-606-5234
High Torque Screw
1.465 inches fastener length, flat countersunk head style, 0.3988 inches head diameter, grip diameter: between 0.2490 inches and 0.2495 inches .
Manufacturer part number NAS158C4T17 for national stock number 5305016065234.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-606-5234.
-
MPN or Model
NAS158C4T17
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.403 inches -
Fastener Length
1.465 inches -
Head Style
Flat countersunk -
Head Diameter
0.3988 inches -
Grip Diameter
Between 0.2490 inches and 0.2495 inches -
Internal Drive Style
Offset cruciform (torque set) -
Thread Diameter
0.250 inches -
Grip Length
1.062 inches -
Thready Qty Per Inch (tpi)
28 -
Min. Tensile Strength (psi)
3700 pounds per square inch -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Material
Iron alloy 660 -
Material Specification
Ams 5731 assn standard single material response or ams 5732 assn standard single material response or ams 5737 assn standard single material response or ams 5853 assn standard single material response -
Thread Series Designator
Unjf
More from these suppliers
- 1680-00-133-7098 MPN 0713096-2Bungee Assy Rudder
- 1560-00-726-3264 MPN 4129007-1Aircraft Structural Component Support
- 1560-00-841-5227 MPN 4155004-2Engine Mount Adapter
- 1560-00-932-6236 MPN 1511015-2Aircraft Window Panel
- 1560-01-111-2065 MPN 4034800-4Aircraft Spar
- 1560-01-230-4281 MPN 4011245-1Aircraft Structural Plate
- 1560-01-602-1158 MPN 0712618-3Aircraft Stiffener
- 1560-01-603-5664 MPN 0760144-2Aircraft Structural Component Bracket
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-606-5234 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS158C4T17 | Cessna Aircraft Company |
NAS1581C4T17 | Cessna Aircraft Company |
NAS1581C4T17 | National Aerospace Standards |
Stock Check
- NS: 32
- NE: 2088
- AR: 1