NSN 5305-01-654-0344
High Torque Screw
1.051 inches fastener length, flat countersunk head style, 0.3518 inches head diameter, grip diameter: between 0.2202 inches and 0.2207 inches .
Manufacturer part number SC5053-3Y11 for national stock number 5305016540344.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-654-0344.
-
MPN or Model
SC5053-3Y11
-
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.363 inches -
Fastener Length
1.051 inches -
Head Style
Flat countersunk -
Head Diameter
0.3518 inches -
Grip Diameter
Between 0.2202 inches and 0.2207 inches -
Internal Drive Style
Torque-set ribbed -
End Application
C-17a aircraft -
Thread Diameter
0.190 inches -
Grip Length
0.688 inches -
Thready Qty Per Inch (tpi)
32 -
Min. Tensile Strength (psi)
2000 pounds per square inch -
Countersink Angle
Between 129.0 degrees and 131.0 degrees -
Part Name Assigned By Controlling Agency
Screw, machine 130 degrees fl hd, ms14191 recess, 95 ksi fsu, ti -
Material
Titanium alloy uns r56400 -
Material Specification
Ams 4928 assn standard single material response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-00-324-8531 MPN HT8137-4-6Close Tolerance Screw
- 5305-00-505-2912 MPN LS15264V3-8Machine Screw
- 5305-01-025-6962 MPN HT4049-4D15Close Tolerance Screw
- 5305-01-036-0848 MPN 5C1711-4-5Machine Screw
- 5305-01-046-3976 MPN HT4010-5-19Shoulder Screw
- 5305-01-047-6250 MPN 51B222-22Close Tolerance Screw
- 5305-01-056-4415 MPN VT1693F3-2Close Tolerance Screw
- 5305-01-105-1143 MPN HT4068-4-11AClose Tolerance Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-654-0344 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
SC5053-3Y11 | Arconic Global Fasteners & Rings, |
FIT7884-3Y11 | Fastener Innovation Technology, Inc. |
3D0080-3Y11 | Boeing Company, The |