NSN 5305-00-123-9189
High Torque Screw
Primer coat applied to head and shank.
Manufacturer part number 3MFR123-3-7P for national stock number 5305001239189.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-00-123-9189.
-
MPN or Model
3MFR123-3-7P
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.380 inches and 0.447 inches -
Fastener Length
Between 0.828 inches and 0.875 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.3765 inches and 0.3813 inches -
Grip Diameter
Between 0.1885 inches and 0.1895 inches -
Internal Drive Style
High-torque -
Thread Diameter
0.190 inches -
Grip Length
Between 0.428 inches and 0.448 inches -
Thready Qty Per Inch (tpi)
32 -
Countersink Angle
100.0 degrees -
Surface Finish
32.0 microinches threads -
Material
Stainless steel -
Surface Treatment
Cadmium -
Surface Treatment Specification
Qq-p-416, type 2, class 3 federal specification single treatment response -
Thread Series Designator
Unf
More from these suppliers
- 5305-00-101-5701 MPN HT4062-3-9Close Tolerance Screw
- 5305-00-107-1991 MPN NAS1189-04P6Socket Head Cap Screw
- 5305-00-245-3739 MPN HT42A15HShoulder Screw
- 5305-00-280-3340 MPN HT4013-4-8XClose Tolerance Screw
- 5305-00-283-7456 MPN HT271A4-10Close Tolerance Screw
- 5305-00-450-4085 MPN HR101H5-10Close Tolerance Screw
- 5305-00-503-5742 MPN LS15234-06-4Close Tolerance Screw
- 5305-00-512-5227 MPN LS15235V3-7Close Tolerance Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-00-123-9189 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
3MFR123-3-7P | Boeing Company, The |
HT123-3-7 | Hi-shear Corporation |
HT123-3-7 | Lisi Aerospace Canada Corp |