NSN 5305-00-957-8379
Bolt Stove
Between 1.204 inches and 1.250 inches fastener length, flat countersunk undercut head style, between 0.628 inches and 0.633 inches head diameter, head height: between 0.087 inches and 0.089 inches .
Manufacturer part number HT5U11 for national stock number 5305009578379.
Datasheet
-
Product description
Machine Screw NSN 5305-00-957-8379.
-
MPN or Model
HT5U11
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.531 inches -
Fastener Length
Between 1.204 inches and 1.250 inches -
Head Style
Flat countersunk undercut -
Head Diameter
Between 0.628 inches and 0.633 inches -
Head Height
Between 0.087 inches and 0.089 inches -
Internal Drive Style
High-torque -
Thread Diameter
0.312 inches -
Thready Qty Per Inch (tpi)
24 -
Min. Tensile Strength (psi)
180000 pounds per square inch -
Countersink Angle
100.0 degrees -
Screw Material
Steel comp e4340 or steel comp 4340 or steel comp 8740 or steel comp 8735 or steel comp 6150 or steel comp 4140 or steel comp 4130 or steel comp 4037 -
Screw Surface Treatment
Cadmium -
Thread Series Designator
Unf
More from these suppliers
- 1560-01-575-2570 MPN 3M943E4-5-6Headle Shoulder Pin
- 5305-00-146-7177 MPN HR101V-6-23Close Tolerance Screw
- 5305-00-345-2368 MPN HT4024L4-2Close Tolerance Screw
- 5305-00-456-2477 MPN NAS1101C04H16Machine Screw
- 5305-00-805-4253 MPN 51B221-32HClose Tolerance Screw
- 5305-00-834-0304 MPN NAS1206-22Close Tolerance Screw
- 5305-00-936-9883 MPN 3MFR1504-9Machine Screw
- 5305-01-142-9405 MPN HT4041-3-5-4YShoulder Screw
An externally threaded fastener whose threaded portion is of one nominal diameter, no 0 (0.060 in./1.5 mm) or larger, designed to be held or driven with either a wrench or an inserted driver or both (excluding internal socket or internal multiple spline types), in sizes below no. 10 (0.190 in./5 mm). No. 10 and larger sizes must have a head designed for any type inserted driver (excluding internal socket or internal multiple spline types), but may also be designed for external wrenching. A locking feature may be incorporated in the design of the head or threads. Excludes bolt, clevis; bolt, externally relieved body; screw, externally relieved body; and screw, assembled washer. See also, screw, instrument; bolt, machine; bolt, internal wrenching; and screw, cap socket head.
Pricing and Availability
Get a quote for 5305-00-957-8379 machine screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
HT5U11 | Hi-shear Corporation |
3M49-5-11 | Boeing Company, The |