NSN 5306-00-003-4146
Close Tolerance Hex Head Bolt
W/retaining element shank.
Manufacturer part number CIPRD-MS27576-8-72R for national stock number 5306000034146.
Datasheet
-
Product description
Close Tolerance Bolt NSN 5306-00-003-4146.
-
MPN or Model
CIPRD-MS27576-8-72R
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.3 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.401 inches and 0.546 inches -
Fastener Length
Between 5.146 inches and 5.166 inches -
Head Style
Dished hexagon -
Head Height
Between 0.251 inches and 0.266 inches -
Width Between Flats
Between 0.741 inches and 0.762 inches -
Grip Diameter
Between 0.4982 inches and 0.4991 inches -
Shank Unthreaded Hole Diameter
0.106 inches first hole and 0.116 inches first hole -
Thread Diameter
0.500 inches -
Grip Length
Between 4.500 inches and 4.516 inches -
Thready Qty Per Inch (tpi)
20 -
Hardness Rating
36.0 rockwell c and 41.0 rockwell c -
Distance From Head Largest Bearing Surface To Shank Hole Center
5.026 inches first hole and 5.056 inches first hole -
Surface Finish
63.0 microinches grip -
Material
Steel -
Material Specification
Mil-b-83050 military specification single material response -
Surface Treatment
Cadmium and chromate -
Surface Treatment Specification
Qq-p-416 type 2 cl 2 federal specification all treatment responses -
Thread Series Designator
Unjf
More from these suppliers
- 5305-01-386-6076 MPN 02398-1Machine Screw
- 5305-01-614-7116 MPN 03298-05Hexagon Head Cap Screw
- 5306-01-382-5972 MPN 02312-7Machine Bolt
- 5940-00-045-8693 MPN NAS709T1Stud Terminal
- 5305-00-003-6825 MPN NAS6002U28Machine Screw
- 5305-00-071-1764 MPN MS90725-104Hexagon Head Cap Screw
- 5305-00-144-0545 MPN NAS1101C3H16Machine Screw
- 5305-00-144-3838 MPN MILS7839Machine Screw
An externally threaded fastener whose unthreaded portion is of a specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten-thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads. For items having close tolerance, and fabricated from material having 160,000 pounds per square inch (1100 megapascals) minimum tensile strength, see bolt, shear. For items fabricated from material having less than 160,000 pounds per square inch (1100 megapascals) minimum tensile strength and not having a close tolerance, see bolt, machine.
Pricing and Availability
Get a quote for 5306-00-003-4146 close tolerance boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
CIPRD-MS27576-8-72R | Defense Logistics Agency |
MS27576-8-72 | Military Standards |
106467-8-72 | Sps Technologies, Llc |
MS27576-8-72 | National Aerospace Standards |