NSN 5306-00-017-6143
Shouldered Rivet Ring Bolt
About this product
Between 1.310 inches and 1.440 inches eye inside diameter, between 0.250 inches and 0.310 inches shoulder thickness, between 1.750 inches and 1.880 inches shank length, eye stock diameter: between 0.560 inches and 0.620 inches .
Manufacturer part number MS51937-7 for national stock number 5306000176143.
Datasheet
-
Product description
Eye Bolt NSN 5306-00-017-6143.
-
MPN or Model
MS51937-7
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.8 lb -
Thread Class
2a -
Thread Direction
Right-hand -
Thread Length
1.380 inches -
Eye Inside Diameter
Between 1.310 inches and 1.440 inches -
Shoulder Thickness
Between 0.250 inches and 0.310 inches -
Shank Length
Between 1.750 inches and 1.880 inches -
Eye Stock Diameter
Between 0.560 inches and 0.620 inches -
Shoulder Diameter
Between 1.000 inches and 1.060 inches -
Overall Length
Between 4.560 inches and 4.940 inches -
Thread Diameter
0.625 inches -
Thready Qty Per Inch (tpi)
11 -
Distance From Center Of Eye To Shank End
Between 3.285 inches and 3.660 inches -
Eye Outside Width
2.560 inches -
Material
Steel -
Material Specification
Mil-b-45908 military specification single material response -
Style Designator
Round, closed w/shoulder -
Thread Series Designator
Unc
More from these suppliers
- 5935-00-004-0232 MPN MS27506A082Electrical Connector Backshell
- 4820-00-045-7414 MPN MS24593Check Valve
- 5935-00-131-9883 MPN MS3126E14-5PWElectrical Plug Connector
- 5935-00-140-0067 MPN MS27473T24A61PBElectrical Plug Connector
- 5935-00-173-4324 MPN MS24019-2Electrical Receptacle Connector
- 5935-00-192-1344 MPN MS3108A18-4PElectrical Plug Connector
- 5935-00-201-7278 MPN MS3106A22-33PElectrical Plug Connector
- 5935-00-233-6783 MPN MSI7508E16A26SElectrical Receptacle Connector
Eye Bolt
An externally threaded device whose threaded portion is of one nominal diameter, without a head, but with the unthreaded end either bent more than 225 degrees (3.925 radians) or cast, forged, or punched to resemble an eye. See also bolt, hook. Excludes connector, rod end.
Pricing and Availability
Get a quote for 5306-00-017-6143 eye boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
MS51937-7 | Military Standards |
5306000176143 | E.c.a Etablissement |
Stock Check
Availability for this item was last checked on 03/18/24.
The quantities and conditions available at the time were:
- NS: 50
- NE: 433
- SV: 1
- AR: 9