NSN 5306-00-026-2125
Coaxial Connector
Between 1.509 inches and 1.556 inches fastener length, double hexagon head style, between 0.200 inches and 0.220 inches head height, width between flats: between 0.553 inches and 0.564 inches .
Manufacturer part number ST3M561-6-18 for national stock number 5306000262125.
Datasheet
-
Product description
Shear Bolt NSN 5306-00-026-2125.
-
MPN or Model
ST3M561-6-18
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.374 inches and 0.441 inches -
Fastener Length
Between 1.509 inches and 1.556 inches -
Head Style
Double hexagon -
Head Height
Between 0.200 inches and 0.220 inches -
Width Between Flats
Between 0.553 inches and 0.564 inches -
Grip Diameter
Between 0.3735 inches and 0.3745 inches -
Single Shear Strength
132000 pounds per square inch -
Thread Diameter
0.375 inches -
Grip Length
Between 1.115 inches and 1.135 inches -
Thready Qty Per Inch (tpi)
24 -
Min. Tensile Strength (psi)
220000 pounds per square inch -
Material
Steel -
Surface Treatment
Cadmium -
Thread Series Designator
Unjf
More from these suppliers
- 5305-00-486-2592 MPN AIC1023H10-16Close Tolerance Screw
- 5305-00-515-6904 MPN AIC551C3-399Shoulder Screw
- 5305-01-190-4590 MPN BACB30LH3-27Close Tolerance Screw
- 5305-01-346-0078 MPN AIC4414-3-27Machine Screw
- 5305-01-381-2343 MPN AIC818-4-320CSocket Head Cap Screw
- 5305-01-417-2491 MPN TX1026V-4-19Close Tolerance Screw
- 5305-01-417-2491 MPN TX1026V4-19AClose Tolerance Screw
- 5305-01-512-8375 MPN TX1026C4D16AClose Tolerance Screw
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-00-026-2125 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
ST3M561-6-18 | Boeing Company, The |
MB13-6-18 | Alcoa Fastening Systems |
73992-6-18 | Sps Technologies, Llc |
A1C220-6-18 | Sps Technologies, Llc |
MB13-6-18 | Hi-shear Corporation |
A1C244-6D18 | Sps Technologies, Llc |
ST3M561-6-17 | Huck International, Inc. |
MB13-6-18 | Lisi Aerospace Canada Corp |
73992-6-18 | Sps Technologies Inc |
ST3M561-6-17 | Standard Pressed Steel Co Aircraft |
ST3M561-6-17 | Precision Fastening Sub Omark |
ST3M561-6-17 | Huck Intl Inc |