NSN 5305-01-009-6705
High Torque Screw
Between 0.840 inches and 0.887 inches fastener length, flat countersunk head style, 0.507 inches head diameter, grip diameter: between 0.2483 inches and 0.2492 inches .
Manufacturer part number SFT22-4A9 for national stock number 5305010096705.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-009-6705.
-
MPN or Model
SFT22-4A9
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.268 inches and 0.335 inches -
Fastener Length
Between 0.840 inches and 0.887 inches -
Head Style
Flat countersunk -
Head Diameter
0.507 inches -
Grip Diameter
Between 0.2483 inches and 0.2492 inches -
Internal Drive Style
Offset cruciform (torque set) -
Thread Diameter
0.250 inches -
Grip Length
Between 0.552 inches and 0.572 inches -
Thready Qty Per Inch (tpi)
28 -
Min. Tensile Strength (psi)
220000 pounds per square inch -
Hardness Rating
46.0 rockwell c and 50.0 rockwell c -
Countersink Angle
100.0 degrees -
Surface Finish
32.0 microinches threads -
Material
Steel comp h11 -
Material Specification
Ams6485 assn standard single material response -
Surface Treatment
Cadmium -
Surface Treatment Specification
Nas 672 assn standard single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-00-025-4068 MPN 51B600C3-12BMachine Screw
- 5305-00-680-5923 MPN BACB30LU4-17Close Tolerance Screw
- 5305-00-725-5912 MPN AIC813-4-R17Machine Screw
- 5305-00-767-3272 MPN 51B220-4Close Tolerance Screw
- 5305-00-948-4110 MPN NAS1102-06-20Machine Screw
- 5305-01-054-6235 MPN C9535-6-17Close Tolerance Screw
- 5305-01-109-5445 MPN NAS1101E06-12Machine Screw
- 5305-01-157-1984 MPN 3M893-3-5Machine Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-009-6705 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
SFT22-4A9 | Sps Technologies, Llc |
VS2545T4F9 | Alcoa Global Fasteners, Inc. |
AIC82-4-9 | Sps Technologies, Llc |
C082-4-9 | Lockheed Martin Corporation |
A1C82-4-9 | Sps Technologies, Llc |
SFT22-4A9 | Sps Technologies, Llc |