NSN 5306-00-049-9878
Wheel Bolt
Between 0.428 inches and 0.448 inches fastener length, hexagon head style, between 0.115 inches and 0.135 inches head height, width between flats: between 0.367 inches and 0.376 inches .
Manufacturer part number 208810 for national stock number 5306000499878.
Datasheet
-
Product description
Machine Bolt NSN 5306-00-049-9878.
-
MPN or Model
208810
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Direction
Right-hand -
Thread Length
Between 0.366 inches and 0.386 inches -
Fastener Length
Between 0.428 inches and 0.448 inches -
Head Style
Hexagon -
Head Height
Between 0.115 inches and 0.135 inches -
Width Between Flats
Between 0.367 inches and 0.376 inches -
Shank Unthreaded Hole Diameter
0.065 inches first hole and 0.075 inches first hole -
Thread Diameter
0.190 inches -
Features Provided
Finished head -
Nonstandard Thread Pitch Diameter
+0.1648/+0.1667 inches -
Thready Qty Per Inch (tpi)
32 -
Distance From Head Largest Bearing Surface To Shank Hole Center
0.318 inches first hole and 0.328 inches first hole -
Surface Finish
63.0 microinches bearing surface of head -
Material
Stainless steel -
Material Specification
Ams 7472 assn standard single material response -
Thread Series Designator
Unf
More from these suppliers
- 5305-00-638-8677 MPN BACB30LH3U19Machine Screw
- 5305-00-809-0728 MPN 51B333-1Machine Screw
- 5305-00-915-4767 MPN A1C792-4-3Machine Screw
- 5305-01-070-9156 MPN AIC984-5-7PClose Tolerance Screw
- 5305-01-140-3065 MPN AIC811-02-17Socket Head Cap Screw
- 5305-01-246-3864 MPN AIC811-04-21Socket Head Cap Screw
- 5305-01-336-2988 MPN AIC1652-4-12AClose Tolerance Screw
- 5305-01-365-0405 MPN BACB30LR3-20Close Tolerance Screw
An externally threaded fastener designed for insertion through holes in assembled parts and normally intended to be tightened or released by torquing a nut. the threaded and unthreaded portions are both of one nominal diameter of 0.190 inch (5 mm) or larger. The head is not designed to be held or driven with an inserted driver or by the thumb and fingers. a locking feature may be incorporated in the design of the head or threads. head dimensions and sizes of threaded and unthreaded portions shall conform to internationally recognized fastener standards. for items having a grip length portion machined to a tolerance of 0.0015 inch (0.038 mm) or less, bolt, shear. See also screw, cap, hexagon head and screw, machine.
Pricing and Availability
Get a quote for 5306-00-049-9878 machine boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
208810 | Sps Technologies, Llc |
208810 | United Technologies Corporation |
208810 | Sps Technologies, Llc |