NSN 5306-00-332-4486
Close Tolerance Hex Head Bolt
Between 1.474 inches and 1.504 inches fastener length, double hexagon w/hole head style, between 0.378 inches and 0.398 inches head height, width between flats: between 0.430 inches and 0.439 inches .
Manufacturer part number VAL23033-6-14 for national stock number 5306003324486.
Datasheet
-
Product description
Close Tolerance Bolt NSN 5306-00-332-4486.
-
MPN or Model
VAL23033-6-14
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.589 inches and 0.639 inches -
Fastener Length
Between 1.474 inches and 1.504 inches -
Head Style
Double hexagon w/hole -
Head Height
Between 0.378 inches and 0.398 inches -
Width Between Flats
Between 0.430 inches and 0.439 inches -
Extended Washer Diameter
Between 0.639 inches and 0.649 inches -
Extended Washer Thickness
Between 0.081 inches and 0.101 inches -
Grip Diameter
Between 0.3740 inches and 0.3745 inches -
Thread Diameter
0.375 inches -
Grip Length
Between 0.865 inches and 0.885 inches -
Thready Qty Per Inch (tpi)
24 -
Material
Stainless steel -
Surface Treatment
Passivate -
Thread Series Designator
Unf
More from these suppliers
- 5305-00-680-5923 MPN BACB30LU4-17Close Tolerance Screw
- 5305-01-160-7561 MPN ST3M557-5-18Close Tolerance Screw
- 5305-01-451-9021 MPN BACB30LH2-9Close Tolerance Screw
- 5305-01-512-8411 MPN 3M1170D3-5AFClose Tolerance Screw
- 5305-01-539-5816 MPN 3M927-4L8Close Tolerance Screw
- 5306-00-321-9350 MPN ST3M453-7-10Close Tolerance Bolt
- 5306-00-522-9021 MPN VAL23611-6D31Close Tolerance Bolt
- 5306-00-926-4357 MPN 3014T59P01Machine Bolt
An externally threaded fastener whose unthreaded portion is of a specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten-thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads. For items having close tolerance, and fabricated from material having 160,000 pounds per square inch (1100 megapascals) minimum tensile strength, see bolt, shear. For items fabricated from material having less than 160,000 pounds per square inch (1100 megapascals) minimum tensile strength and not having a close tolerance, see bolt, machine.
Pricing and Availability
Get a quote for 5306-00-332-4486 close tolerance boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
VAL23033-6-14 | Valley-todeco, Inc. |
74328-6-14 | Sps Technologies, Llc |
MB84-6-14 | Hi-shear Corporation |
VS3060-6-14 | Arconic Global Fasteners & Rings, |
BM3326-6-14 | Huck International, Inc. |
S371-6-14 | Huck International, Inc. |
MB84-6-14 | Lisi Aerospace Canada Corp |
AIC752-6-14 | Sps Technologies, Llc |
ST3M571-6-14 | Sps Technologies, Llc |
S11-1059-6-14 | Sonic Industries Inc. |
ST3M571-6-14 | Heartland Precision Fasteners, Inc. |
ST3M571-6-14 | Alcoa Global Fasteners, Inc. |
ST3M571-6-14 | Boeing Company, The |
74328-6-14 | Sps Technologies Inc |
S371-6-14 | Huck Intl Inc |
BM3326-6-14 | Huck Intl Inc |
10114240 | Nimikkeistokeskus Ncb Finland |
VS3060-6-14 | Alcoa Global Fasteners, Inc. |
ST3M571-6-14 | Saturn Fasteners Inc |
SLB253-6-14 | Space-lok, Inc. |
GS1030-6-14 | B & B Specialties Inc. |
ST3M571-6-14 | Houston Precision Fasteners I, Lp |