NSN 5306-00-059-8649
Wheel Bolt
2.250 inches fastener length, hexagon countersunk head style, 0.440 inches head height, width between flats: between 0.740 inches and 0.750 inches .
Manufacturer part number 8499669-1 for national stock number 5306000598649.
Datasheet
-
Product description
Machine Bolt NSN 5306-00-059-8649.
-
MPN or Model
8499669-1
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
2a -
Thread Direction
Right-hand -
Thread Length
1.880 inches -
Fastener Length
2.250 inches -
Head Style
Hexagon countersunk -
Head Height
0.440 inches -
Width Between Flats
Between 0.740 inches and 0.750 inches -
Shank Unthreaded Hole Diameter
0.110 inches first hole and 0.130 inches first hole -
Thread Diameter
0.500 inches -
Features Provided
Finished head -
Thready Qty Per Inch (tpi)
13 -
Countersink Angle
49.0 degrees -
Distance From Head Largest Bearing Surface To Shank Hole Center
0.120 inches first hole -
Material
Steel comp 303 -
Material Specification
Qq-s-763 federal specification single material response -
Surface Treatment
Oxide -
Thread Series Designator
Unc
More from these suppliers
- 5950-00-647-5408 MPN K8889252P1Power Transformer
- 5905-01-026-3282 MPN 1717345-9Nonprecision Wire Wound Variable Resistor
- 5985-01-029-0529 MPN 1712118-1Diplexer
- 5950-01-057-3248 MPN 8584120-1Audio Frequency Transformer
- 5905-01-094-1843 MPN 990413-542Film Fixed Resistor
- 5985-01-107-0598 MPN 8680158-1Waveguide Assembly
- 5930-01-287-2213 MPN 8160306-13Push Switch
- 5935-00-067-5138 MPN 8506456-68Electrical Receptacle Connector Body
An externally threaded fastener designed for insertion through holes in assembled parts and normally intended to be tightened or released by torquing a nut. the threaded and unthreaded portions are both of one nominal diameter of 0.190 inch (5 mm) or larger. The head is not designed to be held or driven with an inserted driver or by the thumb and fingers. a locking feature may be incorporated in the design of the head or threads. head dimensions and sizes of threaded and unthreaded portions shall conform to internationally recognized fastener standards. for items having a grip length portion machined to a tolerance of 0.0015 inch (0.038 mm) or less, bolt, shear. See also screw, cap, hexagon head and screw, machine.
Pricing and Availability
Get a quote for 5306-00-059-8649 machine boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
8499669-1 | L-3 Communications Corporation |
8499669-1 | Golden West Glass Of Sacramento Inc |
8499669-1 | Lockheed Martin Corp |