NSN 5306-00-074-2701
Coaxial Connector
1.349 inches fastener length, double hexagon w/hole head style, 0.348 inches head height, width between flats: between 0.367 inches and 0.376 inches .
Manufacturer part number MS21250-05012 for national stock number 5306000742701.
Datasheet
-
Product description
Shear Bolt NSN 5306-00-074-2701.
-
MPN or Model
MS21250-05012
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.589 inches and 0.609 inches -
Fastener Length
1.349 inches -
Head Style
Double hexagon w/hole -
Head Height
0.348 inches -
Width Between Flats
Between 0.367 inches and 0.376 inches -
Extended Washer Diameter
Between 0.521 inches and 0.531 inches -
Extended Washer Thickness
0.082 inches -
Grip Diameter
Between 0.3110 inches and 0.3120 inches -
Thread Diameter
0.312 inches -
Grip Length
Between 0.740 inches and 0.760 inches -
Thready Qty Per Inch (tpi)
24 -
Min. Tensile Strength (psi)
180000 pounds per square inch -
Hardness Rating
39.0 rockwell c and 43.0 rockwell c -
Material
Steel comp e4340 or steel comp 8740 or steel comp 6150 or steel comp 4140 -
Surface Treatment
Cadmium and chromate -
Surface Treatment Specification
Qq-p-416 type 2 class 3 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-01-045-2903 MPN BACB30LU5-21Close Tolerance Screw
- 5305-01-603-8572 MPN PMT1124-10Close Tolerance Screw
- 5306-00-015-8260 MPN 3P61538-101Shoulder Bolt
- 5306-00-110-6316 MPN 9662M67P01Machine Bolt
- 5306-00-151-8678 MPN VAL22034-928Shear Bolt
- 5306-00-205-3521 MPN VFK100G-05052Shear Bolt
- 5306-00-205-3700 MPN BACB30MF6-18Close Tolerance Bolt
- 5306-00-508-7699 MPN VEP220555-8-14Machine Bolt
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-00-074-2701 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
MS21250-05012 | Military Standards |
VFK100G-05012 | Valley-todeco, Inc. |