NSN 5306-01-118-4898
Coaxial Connector
Between 0.933 inches and 0.963 inches fastener length, spline drive shear head head style, 0.140 inches head height, grip diameter: between 0.1885 inches and 0.1894 inches .
Manufacturer part number VS3133-3-10 for national stock number 5306011184898.
Datasheet
-
Product description
Shear Bolt NSN 5306-01-118-4898.
-
MPN or Model
VS3133-3-10
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.298 inches and 0.348 inches -
Fastener Length
Between 0.933 inches and 0.963 inches -
Head Style
Spline drive shear head -
Head Height
0.140 inches -
Grip Diameter
Between 0.1885 inches and 0.1894 inches -
Head Minor Diameter
Between 0.383 inches and 0.389 inches -
Thread Diameter
0.190 inches -
Grip Length
Between 0.615 inches and 0.635 inches -
Thready Qty Per Inch (tpi)
32 -
Min. Tensile Strength (psi)
220000 pounds per square inch -
Surface Finish
32.0 microinches threads -
Material
Steel comp h11 -
Material Specification
Ams-6487 assn standard single material response -
Surface Treatment
Cadmium -
Surface Treatment Specification
Nas672 assn standard single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-01-136-7149 MPN BACB30LU5-8Close Tolerance Screw
- 5305-01-412-5358 MPN LD111-0045-2310Close Tolerance Screw
- 5305-01-413-7373 MPN GB510FG4-28Close Tolerance Screw
- 5305-01-413-8481 MPN VCL0009-4-33Close Tolerance Screw
- 5305-01-462-2754 MPN 3M1170D5-7AClose Tolerance Screw
- 5305-01-500-6383 MPN ST3M557-4D14Close Tolerance Screw
- 5305-01-618-7160 MPN VT10021-3-15Close Tolerance Screw
- 5305-01-668-3185 MPN BACB30LR4-9YClose Tolerance Screw
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-01-118-4898 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
VS3133-3-10 | Arconic Global Fasteners & Rings, |
AIC596-3-10 | Sps Technologies, Llc |
120978-3-10 | Sps Technologies, Llc |
PBF7521-3-10 | Sps Technologies, Llc |
VS3133-3-10 | Alcoa Global Fasteners, Inc. |
C7521-3-10 | Valley-todeco, Inc. |
H411-3-10 | Huck International, Inc. |
C7521-3-10 | Sps Technologies, Llc |
VS3133-3-10 | Tactair Fluid Controls, Inc. |
C7521-3-10 | Alcoa Global Fasteners, Inc. |
C7521-3-10 | Lockheed Martin Corporation |
596-3-10 | Sps Technologies, Llc |
SF118-3-10 | Saturn Fasteners Inc |