NSN 5306-00-077-9081
Coaxial Connector
1.270 inches fastener length, hexagon head style, between 0.203 inches and 0.235 inches head height, width between flats: between 0.615 inches and 0.627 inches .
Manufacturer part number 26-750516-1 for national stock number 5306000779081.
Datasheet
-
Product description
Shear Bolt NSN 5306-00-077-9081.
-
MPN or Model
26-750516-1
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.332 inches -
Fastener Length
1.270 inches -
Head Style
Hexagon -
Head Height
Between 0.203 inches and 0.235 inches -
Width Between Flats
Between 0.615 inches and 0.627 inches -
Grip Diameter
Between 0.4358 inches and 0.4367 inches -
Shank Unthreaded Hole Diameter
0.106 inches first hole -
Thread Diameter
0.438 inches -
Grip Length
0.938 inches -
Thready Qty Per Inch (tpi)
20 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Distance From Head Largest Bearing Surface To Shank Hole Center
1.157 inches first hole -
Material
Steel -
Thread Series Designator
Unf
More from these suppliers
- 5945-00-070-1854 MPN CVC6056-4Thermal Flasher
- 1560-00-115-7656 MPN 215-24762-1Locking Arm Pivot
- 5935-00-184-7408 MPN CVC6063AE27SElectrical Receptacle Connector
- 4920-00-232-9658 MPN 216-01508-1Punched Tape Reader
- 1560-00-437-9976 MPN 216-60221-31Staba Trailing Edge
- 1680-00-446-4660 MPN CV21-605503-1Duct Liner
- 1560-00-459-4562 MPN 215-21421-10Th Actuator Support
- 5935-00-827-0492 MPN CVC5891A66S6BElectrical Plug Connector
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-00-077-9081 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
26-750516-1 | Triumph Aerostructures, Llc |