NSN 5306-00-106-8818
Wheel Bolt
Between 1.365 inches and 1.385 inches fastener length, double hexagon w/hole head style, between 0.412 inches and 0.432 inches head height, width between flats: between 0.430 inches and 0.439 inches .
Manufacturer part number R586P19U for national stock number 5306001068818.
Datasheet
-
Product description
Machine Bolt NSN 5306-00-106-8818.
-
MPN or Model
R586P19U
-
Schedule B
7508.90.0000 (Other articles of nickel, nesoi (excluding cloth, grill & netting of nickel wire)) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.990 inches and 1.070 inches -
Fastener Length
Between 1.365 inches and 1.385 inches -
Head Style
Double hexagon w/hole -
Head Height
Between 0.412 inches and 0.432 inches -
Width Between Flats
Between 0.430 inches and 0.439 inches -
Extended Washer Diameter
Between 0.552 inches and 0.572 inches -
Extended Washer Thickness
Between 0.090 inches and 0.100 inches -
Thread Diameter
0.375 inches -
Grip Length
Between 0.315 inches and 0.375 inches -
Features Provided
Finished head -
Thready Qty Per Inch (tpi)
24 -
Surface Finish
63.0 microinches grip -
Material
Nickel alloy 718 -
Material Specification
Inconel 718, fscm 74900 mfr ref single material response -
Thread Series Designator
Unjf
More from these suppliers
- 1560-00-795-1062 MPN 21C490P010Starter Fairing
- 4920-00-869-6000 MPN 1C2992-12P1Test Ad Support Pin
- 5905-00-957-4739 MPN R999P0900AInductive Wire Wound Fixed Resistor
- 4920-01-117-8364 MPN 21C5320G01Compressor Rotor Balance Shroud
- 4920-01-140-5846 MPN 3C3173G01Aircraft Engine Maintenance Fixture
- 4820-01-199-0310 MPN 9386M93P01Check Valve
- 4920-01-231-6446 MPN 3C3593G01Aircraft Engine Maintenance Stand
- 5905-01-249-9051 MPN J167P3242ANoninductive Wire Wound Fixed Resistor
An externally threaded fastener designed for insertion through holes in assembled parts and normally intended to be tightened or released by torquing a nut. the threaded and unthreaded portions are both of one nominal diameter of 0.190 inch (5 mm) or larger. The head is not designed to be held or driven with an inserted driver or by the thumb and fingers. a locking feature may be incorporated in the design of the head or threads. head dimensions and sizes of threaded and unthreaded portions shall conform to internationally recognized fastener standards. for items having a grip length portion machined to a tolerance of 0.0015 inch (0.038 mm) or less, bolt, shear. See also screw, cap, hexagon head and screw, machine.
Pricing and Availability
Get a quote for 5306-00-106-8818 machine boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
R586P19U | General Electric Company |