NSN 5306-00-116-1792
Coaxial Connector
Between 2.590 inches and 2.620 inches fastener length, double hexagon w/hole head style, between 0.425 inches and 0.445 inches head height, width between flats: between 0.492 inches and 0.502 inches .
Manufacturer part number 9653M27P02 for national stock number 5306001161792.
Datasheet
-
Product description
Shear Bolt NSN 5306-00-116-1792.
-
MPN or Model
9653M27P02
-
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.780 inches and 0.820 inches -
Fastener Length
Between 2.590 inches and 2.620 inches -
Head Style
Double hexagon w/hole -
Head Height
Between 0.425 inches and 0.445 inches -
Width Between Flats
Between 0.492 inches and 0.502 inches -
Extended Washer Diameter
Between 0.740 inches and 0.750 inches -
Extended Washer Thickness
Between 0.089 inches and 0.109 inches -
Grip Diameter
Between 0.4416 inches and 0.4422 inches -
Thread Diameter
0.438 inches -
Grip Length
Between 1.800 inches and 1.810 inches -
Thready Qty Per Inch (tpi)
20 -
Min. Tensile Strength (psi)
195000 pounds per square inch -
Material Specification
Ams 6304 assn standard single material response -
Surface Treatment
Nickel and cadmium -
Surface Treatment Specification
Ams 2416 assn standard all treatment responses -
Thread Series Designator
Unjf
More from these suppliers
- 5305-01-055-3811 MPN BACB30LU5-6Close Tolerance Screw
- 5305-01-462-2836 MPN 3M1169V4-7AClose Tolerance Screw
- 5305-01-481-9301 MPN 3M1170V4-9AClose Tolerance Screw
- 5305-01-496-5238 MPN 3M1169V4-17AClose Tolerance Screw
- 5305-01-505-3997 MPN TX1024C3-2-7AClose Tolerance Screw
- 5305-01-512-8306 MPN 3M1170D4-5AFClose Tolerance Screw
- 5306-00-400-5743 MPN VFK100G-07038Shear Bolt
- 5306-00-958-8387 MPN STSBG003A12U026Shear Bolt
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-00-116-1792 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
9653M27P02 | General Electric Company |
9653M27P02 | Valley-todeco, Inc. |
9653M27P02 | Sps Technologies, Llc |
9653M27P02 | M.s. Aerospace Inc. |