NSN 5305-00-501-9861
High Torque Screw
Between 0.386 inches and 0.416 inches fastener length, flat countersunk head style, between 0.328 inches and 0.385 inches head diameter, grip diameter: between 0.1885 inches and 0.1985 inches .
Manufacturer part number LS15266V3-2 for national stock number 5305005019861.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-00-501-9861.
-
MPN or Model
LS15266V3-2
-
Schedule B
8109.90.0000 (Zirconium and articles thereof nesoi) -
NMF (National Motor Freight)
136500 - Metal NOI/metal Alloys NOI -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.251 inches and 0.301 inches -
Fastener Length
Between 0.386 inches and 0.416 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.328 inches and 0.385 inches -
Grip Diameter
Between 0.1885 inches and 0.1985 inches -
Internal Drive Style
Cross recess type 1 -
Thread Diameter
0.190 inches -
Grip Length
Between 0.115 inches and 0.135 inches -
Thready Qty Per Inch (tpi)
32 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Surface Finish
32.0 microinches threads -
Part Name Assigned By Controlling Agency
Navy special project -
Material
Titanium alloy uns r54520 -
Material Specification
Nas621, comp 6al-4v assn standard single material response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-01-417-2492 MPN 3M1169V3-6AClose Tolerance Screw
- 5305-01-508-2215 MPN 3M1169C6-11AClose Tolerance Screw
- 5306-00-092-6833 MPN VFK100G-06017Shear Bolt
- 5306-00-099-8064 MPN GB511H5-12Shear Bolt
- 5306-00-900-2522 MPN MS21250-06066Shear Bolt
- 5306-00-926-5554 MPN 3M33-7-15Close Tolerance Bolt
- 5306-00-947-4205 MPN BACB30GT7P46Shear Bolt
- 5306-01-054-1638 MPN BACB30NF5-52Close Tolerance Bolt
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-00-501-9861 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
LS15266V3-2 | Lockheed Martin Corporation |
LS15266V3-2 | Sps Technologies, Llc |
LS15266V3-2 | Valley-todeco, Inc. |
LS15266V3-2 | Arconic Global Fasteners & Rings, |
LS15266V3-2 | Huck International, Inc. |
LS15266V3-2 | Sps Technologies, Llc |
LS15266V3-2 | Alcoa Global Fasteners, Inc. |
LS15266V3-2 | Molex Incorporated |
LS15266V3-2 | Deutsch Fastener Corp |
LS15266V3-2 | Lockheed Martin Corporation |