NSN 5306-00-119-1835
Coaxial Connector
Between 0.400 inches and 0.450 inches fastener length, dished hexagon head style, between 0.125 inches and 0.140 inches head height, width between flats: between 0.430 inches and 0.439 inches .
Manufacturer part number 101981-4-5 for national stock number 5306001191835.
Datasheet
-
Product description
Shear Bolt NSN 5306-00-119-1835.
-
MPN or Model
101981-4-5
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.722 inches and 0.752 inches -
Fastener Length
Between 0.400 inches and 0.450 inches -
Head Style
Dished hexagon -
Head Height
Between 0.125 inches and 0.140 inches -
Width Between Flats
Between 0.430 inches and 0.439 inches -
Grip Diameter
Between 0.2485 inches and 0.2495 inches -
Thread Diameter
0.250 inches -
Grip Length
Between 0.302 inches and 0.322 inches -
Thready Qty Per Inch (tpi)
28 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Material
Iron alloy 660 -
Material Specification
Ams 5732 assn standard single material response -
Surface Treatment
Passivate -
Surface Treatment Specification
Mil-s-5002 military specification single treatment response -
Thread Series Designator
Unf
More from these suppliers
- 5305-01-417-2490 MPN 3M1169V-3-14Close Tolerance Screw
- 5306-01-035-3136 MPN 20-057-6-27DShoulder Bolt
- 5306-01-541-4498 MPN 94133-3-22Machine Bolt
- 5320-01-142-3230 MPN HLT51YC-5-2Pin-rivet
- 5320-01-144-4797 MPN HLT252DL-8-16Pin-rivet
- 5320-01-144-5667 MPN HLT153TB-16-8Pin-rivet
- 5320-01-144-7403 MPN HLT253TB-10-10Pin-rivet
- 5320-01-362-1556 MPN HLT453SS-10-10Pin-rivet
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-00-119-1835 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
101981-4-5 | Sps Technologies, Llc |
101981-4-5 | Sps Technologies Inc |
SPS101981-4-5 | Sps Technologies Inc |
SPS101981-4-5 | Sps Technologies, Llc |
SPS101981-4-5 | Sps Technologies, Llc |
101981-4-5 | Sps Technologies, Llc |