NSN 5306-00-120-1699
Coaxial Connector
Between 4.049 inches and 4.079 inches fastener length, double hexagon w/hole head style, 0.464 inches head height, width between flats: between 0.553 inches and 0.564 inches .
Manufacturer part number EWB26-7-52 for national stock number 5306001201699.
Datasheet
-
Product description
Shear Bolt NSN 5306-00-120-1699.
-
MPN or Model
EWB26-7-52
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.2 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.789 inches and 0.839 inches -
Fastener Length
Between 4.049 inches and 4.079 inches -
Head Style
Double hexagon w/hole -
Head Height
0.464 inches -
Width Between Flats
Between 0.553 inches and 0.564 inches -
Extended Washer Diameter
Between 0.820 inches and 0.830 inches -
Extended Washer Thickness
0.083 inches -
Grip Diameter
Between 0.4360 inches and 0.4370 inches -
Thread Diameter
0.438 inches -
Grip Length
Between 3.240 inches and 3.260 inches -
Thready Qty Per Inch (tpi)
20 -
Min. Tensile Strength (psi)
260000 pounds per square inch -
Hardness Rating
51.0 rockwell c and 54.0 rockwell c -
Material
Steel comp h11 -
Material Specification
Ams 6485 assn standard single material response or ams6487 assn standard single material response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-00-005-0648 MPN 51B222-10Close Tolerance Screw
- 5305-00-186-9221 MPN AIC82-4-30Close Tolerance Screw
- 5305-00-316-8140 MPN ST3M455-313-1Close Tolerance Screw
- 5305-00-486-2578 MPN AIC1023H10-13Close Tolerance Screw
- 5305-00-680-5889 MPN BACB30LU-4D-35Machine Screw
- 5305-00-808-3282 MPN NAS1102-04-5Machine Screw
- 5305-00-944-9027 MPN 133A1124P6Machine Screw
- 5305-01-116-3085 MPN NAS1101-06H3Machine Screw
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-00-120-1699 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
EWB26-7-52 | Sps Technologies, Llc |
BM5526-7-52 | Huck International, Inc. |
VS2005-7-52 | Arconic Global Fasteners & Rings, |
AIC260E7-52 | Sps Technologies, Llc |
EWB26-7-52 | Sps Technologies, Llc |
C305-7-52 | Sps Technologies, Llc |
C305-7-52 | Lockheed Martin Corporation |
BM5526-7-52 | Huck Intl Inc |
VS2005-7-52 | Alcoa Global Fasteners, Inc. |
HE111-0034-0752 | Rockwell International Corp |