NSN 5306-00-127-3170
Close Tolerance Hex Head Bolt
Between 5.672 inches and 5.702 inches fastener length, dished hexagon head style, between 0.156 inches and 0.171 inches head height, width between flats: between 0.492 inches and 0.502 inches .
Manufacturer part number 134CM50008-1 for national stock number 5306001273170.
Datasheet
-
Product description
Close Tolerance Bolt NSN 5306-00-127-3170.
-
MPN or Model
134CM50008-1
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.350 inches and 0.400 inches -
Fastener Length
Between 5.672 inches and 5.702 inches -
Head Style
Dished hexagon -
Head Height
Between 0.156 inches and 0.171 inches -
Width Between Flats
Between 0.492 inches and 0.502 inches -
Grip Diameter
Between 0.3108 inches and 0.3118 inches -
Shank Unthreaded Hole Diameter
0.076 inches first hole and 0.086 inches first hole -
Thread Diameter
0.312 inches -
Grip Length
Between 5.302 inches and 5.322 inches -
Thready Qty Per Inch (tpi)
24 -
Distance From Head Largest Bearing Surface To Shank Hole Center
5.543 inches first hole and 5.593 inches first hole -
Material
Steel comp 4140 or steel comp e4340 or steel comp 6150 or steel comp 8735 or steel comp 8740 -
Material Specification
Mil-s-5626 military specification 1st material response or mil-s-5000 military specification 2nd material response or mil-s-8503 military specification 3rd material response or mil-s-6098 military specification 4th material response or mil-s-6049 military specification 5th material response -
Surface Treatment
Chromium grip -
Surface Treatment Specification
8.250m, cl 2, fscm 26512 mfr ref single treatment response -
Thread Series Designator
Unf
More from these suppliers
- 1560-00-003-1585 MPN 128EC60050-1Aircraft Thermal Insulation Pipe Covering
- 1560-00-038-0891 MPN 123W10490-504Aircraft Door
- 5935-00-057-0578 MPN GA800GB1Connector Adapter
- 1560-00-066-2929 MPN 123BM10520-1Fitting Assembly
- 1560-00-070-5939 MPN 128CS10012-8Wing Dive Brake Flap
- 1560-00-117-9923 MPN 128WSM34057-1Pin Guide
- 5935-00-118-4700 MPN GF805C14Electrical Connector Potting Mold
- 1560-00-148-8947 MPN A51B20204-27Aircraft Fairing
An externally threaded fastener whose unthreaded portion is of a specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten-thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads. For items having close tolerance, and fabricated from material having 160,000 pounds per square inch (1100 megapascals) minimum tensile strength, see bolt, shear. For items fabricated from material having less than 160,000 pounds per square inch (1100 megapascals) minimum tensile strength and not having a close tolerance, see bolt, machine.
Pricing and Availability
Get a quote for 5306-00-127-3170 close tolerance boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
134CM50008-1 | Northrop Grumman Systems Corporation |