NSN 5306-00-141-4789
Coaxial Connector
3.156 inches fastener length, hexagon head style, 0.125 inches head height, width between flats: 0.438 inches .
Manufacturer part number NAS464-4A45 for national stock number 5306001414789.
Datasheet
-
Product description
Shear Bolt NSN 5306-00-141-4789.
-
MPN or Model
NAS464-4A45
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.344 inches -
Fastener Length
3.156 inches -
Head Style
Hexagon -
Head Height
0.125 inches -
Width Between Flats
0.438 inches -
Grip Diameter
Between 0.2487 inches and 0.2492 inches -
Single Shear Strength
4650 pounds per square inch -
Thread Diameter
0.250 inches -
Grip Length
2.812 inches -
Thready Qty Per Inch (tpi)
28 -
Material
Steel -
Surface Treatment
Cadmium -
Thread Series Designator
Unf
More from these suppliers
- 4920-01-571-0093 MPN NAS1213R20K3 Strap Assembly-tie
- 5305-00-017-6157 MPN NAS1221-4-23PMachine Screw
- 5305-00-115-9436 MPN MS51863-21Tapping Screw
- 5305-00-186-4244 MPN MS24677-164Socket Head Cap Screw
- 5305-00-206-2511 MPN MS35215-57Machine Screw
- 5305-00-225-8470 MPN MS24693-S138Machine Screw
- 5305-00-235-5766 MPN NAS1100-00-4Machine Screw
- 5305-00-281-3120 MPN NAS1081C3D3Setscrew
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-00-141-4789 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS464-4A45 | National Aerospace Standards |