NSN 5306-00-145-0725
Close Tolerance Hex Head Bolt
With nylon material in threads for locking feature.
Manufacturer part number NAS1223C2 for national stock number 5306001450725.
Datasheet
-
Product description
Close Tolerance Bolt NSN 5306-00-145-0725.
-
MPN or Model
NAS1223C2
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.313 inches and 0.363 inches -
Fastener Length
Between 0.448 inches and 0.478 inches -
Head Style
Undercut hexagon -
Head Height
Between 0.110 inches and 0.125 inches -
Width Between Flats
Between 0.367 inches and 0.376 inches -
Grip Diameter
Between 0.1890 inches and 0.1895 inches -
Thread Diameter
0.192 inches -
Grip Length
Between 0.115 inches and 0.135 inches -
Thready Qty Per Inch (tpi)
32 -
Min. Tensile Strength (psi)
140000 pounds per square inch -
Surface Finish
63.0 microinches grip -
Material
Iron alloy 660 -
Material Specification
Ams 5735 assn standard single material response -
Thread Series Designator
Unjf
More from these suppliers
- 5940-01-391-2605 MPN NAS1063A2-TB107BTTerminal Board Marker Strip
- 5940-01-425-7389 MPN NAS1063C8-321Terminal Board Marker Strip
- 5940-01-451-2675 MPN NAS1063E3-551YTerminal Board Marker Strip
- 5940-01-470-3346 MPN NAS1063A2-107BATerminal Board Marker Strip
- 5305-00-007-1550 MPN NAS1131E96PClose Tolerance Screw
- 5305-00-116-1539 MPN NAS1352C08-20Socket Head Cap Screw
- 5305-00-142-4676 MPN NAS1635-06-22Machine Screw
- 5305-00-145-0705 MPN MS27039C1-05Machine Screw
An externally threaded fastener whose unthreaded portion is of a specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten-thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads. For items having close tolerance, and fabricated from material having 160,000 pounds per square inch (1100 megapascals) minimum tensile strength, see bolt, shear. For items fabricated from material having less than 160,000 pounds per square inch (1100 megapascals) minimum tensile strength and not having a close tolerance, see bolt, machine.
Pricing and Availability
Get a quote for 5306-00-145-0725 close tolerance boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS1223C2 | National Aerospace Standards |