NSN 5306-00-151-1145
Wheel Bolt
Between 7.250 inches and 7.297 inches fastener length, hexagon head style, between 0.328 inches and 0.360 inches head height, width between flats: between 0.928 inches and 0.940 inches .
Manufacturer part number AN10-71 for national stock number 5306001511145.
Datasheet
-
Product description
Machine Bolt NSN 5306-00-151-1145.
-
MPN or Model
AN10-71
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.953 inches -
Fastener Length
Between 7.250 inches and 7.297 inches -
Head Style
Hexagon -
Head Height
Between 0.328 inches and 0.360 inches -
Width Between Flats
Between 0.928 inches and 0.940 inches -
Shank Unthreaded Hole Diameter
0.141 inches first hole and 0.151 inches first hole -
Thread Diameter
0.625 inches -
Grip Length
Between 6.297 inches and 6.328 inches -
Features Provided
Finished head -
Thready Qty Per Inch (tpi)
18 -
Min. Tensile Strength (psi)
125000 pounds per square inch -
Hardness Rating
26.0 rockwell c and 32.0 rockwell c -
Distance From Head Largest Bearing Surface To Shank Hole Center
7.031 inches first hole and 7.062 inches first hole -
Material
Steel -
Surface Treatment
Cadmium and dichromate -
Thread Series Designator
Unc
More from these suppliers
- 5935-00-280-1876 MPN AN3102A28-1SElectrical Receptacle Connector
- 5975-00-284-6282 MPN AN3058-28Electrical Box Connector
- 5935-01-048-0080 MPN AN3106A24-7SCElectrical Plug Connector
- 5935-00-148-9339 MPN AN3108B22-12PElectrical Plug Connector
- 5925-00-159-0274 MPN AN3161-20Circuit Breaker
- 5305-00-042-0097 MPN AN510-3-4Machine Screw
- 5305-00-144-3907 MPN AN500A416-28Machine Screw
- 5305-00-151-3355 MPN AN526-1024R16Machine Screw
An externally threaded fastener designed for insertion through holes in assembled parts and normally intended to be tightened or released by torquing a nut. the threaded and unthreaded portions are both of one nominal diameter of 0.190 inch (5 mm) or larger. The head is not designed to be held or driven with an inserted driver or by the thumb and fingers. a locking feature may be incorporated in the design of the head or threads. head dimensions and sizes of threaded and unthreaded portions shall conform to internationally recognized fastener standards. for items having a grip length portion machined to a tolerance of 0.0015 inch (0.038 mm) or less, bolt, shear. See also screw, cap, hexagon head and screw, machine.
Pricing and Availability
Get a quote for 5306-00-151-1145 machine boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
AN10-71 | Aeronautical Standards Group |