NSN 5306-00-151-2433
Wheel Bolt
Between 1.828 inches and 1.875 inches fastener length, hexagon head style, between 0.172 inches and 0.204 inches head height, width between flats: between 0.490 inches and 0.502 inches .
Manufacturer part number AN5C16 for national stock number 5306001512433.
Datasheet
-
Product description
Machine Bolt NSN 5306-00-151-2433.
-
MPN or Model
AN5C16
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.500 inches and 0.578 inches -
Fastener Length
Between 1.828 inches and 1.875 inches -
Head Style
Hexagon -
Head Height
Between 0.172 inches and 0.204 inches -
Width Between Flats
Between 0.490 inches and 0.502 inches -
Shank Unthreaded Hole Diameter
0.076 inches first hole and 0.086 inches first hole -
Thread Diameter
0.312 inches -
Grip Length
Between 1.297 inches and 1.328 inches -
Features Provided
Finished head -
Thready Qty Per Inch (tpi)
24 -
Min. Tensile Strength (psi)
125000 pounds per square inch -
Hardness Rating
26.0 rockwell c and 32.0 rockwell c -
Distance From Head Largest Bearing Surface To Shank Hole Center
1.656 inches first hole and 1.688 inches first hole -
Material
Steel comp 431 -
Material Specification
Mil-s-18732 military specification single material response -
Surface Treatment
Passivate -
Thread Series Designator
Unf
More from these suppliers
- 5935-00-149-4042 MPN AN3102A28-2PElectrical Receptacle Connector
- 5935-00-280-2836 MPN AN3108A12S3PElectrical Plug Connector
- 5930-00-957-6034 MPN AN3022-9Toggle Switch
- 5305-00-077-1503 MPN AN507C632R11Machine Screw
- 5305-00-167-2328 MPN AN530-8-10Tapping Screw
- 5305-00-206-0734 MPN AN526-832-8Machine Screw
- 5305-00-271-7143 MPN AN509P10R16Machine Screw
- 5305-00-637-7408 MPN AN515C6R40Machine Screw
An externally threaded fastener designed for insertion through holes in assembled parts and normally intended to be tightened or released by torquing a nut. the threaded and unthreaded portions are both of one nominal diameter of 0.190 inch (5 mm) or larger. The head is not designed to be held or driven with an inserted driver or by the thumb and fingers. a locking feature may be incorporated in the design of the head or threads. head dimensions and sizes of threaded and unthreaded portions shall conform to internationally recognized fastener standards. for items having a grip length portion machined to a tolerance of 0.0015 inch (0.038 mm) or less, bolt, shear. See also screw, cap, hexagon head and screw, machine.
Pricing and Availability
Get a quote for 5306-00-151-2433 machine boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
AN5C16 | Aeronautical Standards Group |