NSN 5306-00-169-8638
Stripper Bolt
1.633 inches fastener length, dee chamfer head style, between 0.730 inches and 0.770 inches head diameter, head height: 0.125 inches .
Manufacturer part number 14-41698-1 for national stock number 5306001698638.
Datasheet
-
Product description
Shoulder Bolt NSN 5306-00-169-8638.
-
MPN or Model
14-41698-1
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.240 inches -
Fastener Length
1.633 inches -
Head Style
Dee chamfer -
Head Diameter
Between 0.730 inches and 0.770 inches -
Head Height
0.125 inches -
Distance From Centerline To Flat
Between 0.305 inches and 0.315 inches -
Shoulder Diameter
0.4360 inches first shoulder and 0.4370 inches first shoulder -
Shoulder Length
1.333 inches first shoulder -
Shank Unthreaded Hole Diameter
0.076 inches first hole -
Thread Diameter
0.312 inches -
Thready Qty Per Inch (tpi)
24 -
Min. Tensile Strength (psi)
260000 pounds per square inch -
Distance From Head Largest Bearing Surface To Shank Hole Center
1.508 inches first hole -
Shoulder Shape
Round first shoulder -
Material
Steel -
Material Specification
Aisi 4340 assn standard single material response -
Thread Series Designator
Unf
More from these suppliers
- 1560-00-118-3484 MPN RK0131Wing Spar Repair Kit
- 1560-00-140-2598 MPN 14-24025-2Aircraft Skin
- 1560-00-166-2319 MPN 14-11233-19Firewall Panel
- 5940-00-734-1169 MPN 10S203F10Ground Stud Assembly
- 1560-00-768-3078 MPN 70C420Aircraft Structural Component Support
- 1560-00-768-3159 MPN 2-13213-1Plexiglass Retainer Pin
- 1560-00-819-1679 MPN 2-24131-501Aircraft Leading Edge
- 1560-00-901-6248 MPN 3-13553-1Canopy Hook Actuator Latch Clamp
An externally threaded fastener whose threaded portion is of one nominal diameter, no. 10 (0.190 in.) (5 mm) or larger. It has a round unthreaded neck or shank all or part of which is of greater diameter than the threaded portion. The head is not designed to be held or driven with an inserted drivers. A locking feature may be incorporated in the design of the head or threads. For items with a thread diameter smaller than no. 10 (0.190 in.) (5 mm) and those items with an inserted drive head, use screw, shoulder. For items which are no. 10 (0.190 in.) (5 mm) or larger in size and are both shouldered and have an externally relieved body, use bolt, externally relieved body. Excludes thumbscrew.
Pricing and Availability
Get a quote for 5306-00-169-8638 shoulder boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
14-41698-1 | Northrop Grumman Technical Services, |
14-41698-1 | Northrop Grumman Systems Corporation |