NSN 5306-00-174-4082
Wheel Bolt
2.766 inches fastener length, hexagon head style, 0.469 inches head height, width between flats: 1.094 inches .
Manufacturer part number G155HH10-25 for national stock number 5306001744082.
Datasheet
-
Product description
Machine Bolt NSN 5306-00-174-4082.
-
MPN or Model
G155HH10-25
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.953 inches -
Fastener Length
2.766 inches -
Head Style
Hexagon -
Head Height
0.469 inches -
Width Between Flats
1.094 inches -
Shank Unthreaded Hole Diameter
0.141 inches first hole -
Thread Diameter
0.625 inches -
Grip Length
1.812 inches -
Features Provided
Finished head -
Thready Qty Per Inch (tpi)
18 -
Min. Tensile Strength (psi)
180000 pounds per square inch -
Hardness Rating
38.0 rockwell c and 41.0 rockwell c -
Distance From Head Largest Bearing Surface To Shank Hole Center
2.561 inches first hole -
Material
Steel comp e4340 or steel comp 8740 -
Material Specification
Mil-s-5000 military specification 1st material response or mil-s-6049 military specification 2nd material response -
Surface Treatment
Cadmium -
Thread Series Designator
Unf
More from these suppliers
- 1560-00-047-1989 MPN 89TM1610-1Hinge Assembly
- 5935-00-050-3580 MPN GC15R18B8SNElectrical Plug Connector
- 1560-00-070-9700 MPN 128WM10459-2Fitting Assembly
- 1680-00-079-0763 MPN 121AVP10132-25Light Transmitting Indicating Panel
- 5930-00-112-3362 MPN GS836AB8Toggle Switch
- 1560-00-127-0062 MPN 128W10585-8Support Assembly
- 5935-00-140-3226 MPN GA800GV32Electrical Connector Shell
- 5935-00-145-3458 MPN GC837CB18Electrical Connector Cable Clamp
An externally threaded fastener designed for insertion through holes in assembled parts and normally intended to be tightened or released by torquing a nut. the threaded and unthreaded portions are both of one nominal diameter of 0.190 inch (5 mm) or larger. The head is not designed to be held or driven with an inserted driver or by the thumb and fingers. a locking feature may be incorporated in the design of the head or threads. head dimensions and sizes of threaded and unthreaded portions shall conform to internationally recognized fastener standards. for items having a grip length portion machined to a tolerance of 0.0015 inch (0.038 mm) or less, bolt, shear. See also screw, cap, hexagon head and screw, machine.
Pricing and Availability
Get a quote for 5306-00-174-4082 machine boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
G155HH10-25 | Northrop Grumman Systems Corporation |