NSN 5306-00-177-5506
Coaxial Connector
Between 3.635 inches and 3.655 inches fastener length, double hexagon w/hole head style, between 0.378 inches and 0.398 inches head height, width between flats: between 0.430 inches and 0.439 inches .
Manufacturer part number 932.35.60.124 for national stock number 5306001775506.
Datasheet
-
Product description
Shear Bolt NSN 5306-00-177-5506.
-
MPN or Model
932.35.60.124
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.625 inches and 0.665 inches -
Fastener Length
Between 3.635 inches and 3.655 inches -
Head Style
Double hexagon w/hole -
Head Height
Between 0.378 inches and 0.398 inches -
Width Between Flats
Between 0.430 inches and 0.439 inches -
Extended Washer Diameter
Between 0.639 inches and 0.649 inches -
Extended Washer Thickness
Between 0.081 inches and 0.101 inches -
Grip Diameter
Between 0.3735 inches and 0.3745 inches -
Thread Diameter
0.375 inches -
Grip Length
Between 2.990 inches and 3.010 inches -
Thready Qty Per Inch (tpi)
24 -
Min. Tensile Strength (psi)
180000 pounds per square inch -
Hardness Rating
39.0 rockwell c and 43.0 rockwell c -
Surface Finish
32.0 microinches primary washer -
Material
Steel -
Material Specification
Mil-s-5626 military specification single material response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-01-352-1215 MPN HR242-4-14Close Tolerance Screw
- 5305-01-435-3875 MPN BACB30LU7-37Close Tolerance Screw
- 5305-01-536-4449 MPN 3M1278E4D8AShoulder Screw
- 5305-01-591-1409 MPN ST3M557-6-23Close Tolerance Screw
- 5306-00-842-9666 MPN GB511H6-10Machine Bolt
- 5306-01-005-5741 MPN J645P09AMachine Bolt
- 5306-01-027-2000 MPN VAL23033-4-17Close Tolerance Bolt
- 5306-01-044-5187 MPN VAL23607-6D16Shoulder Bolt
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-00-177-5506 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
932.35.60.124 | Pilatus Aircraft Ltd |
MS21250-0648 | Valley-todeco, Inc. |
MS21250-06048 | Arconic Global Fasteners & Rings, |
MS21250-06048 | Alcoa Global Fasteners, Inc. |
MS21250-06048 | Textron Fastening Systems |
MS21250-06048 | Sps Technologies, Llc |
MS21250-06048 | Sps Technologies, Llc |
MS21250-06048 | All Manufacturers, Inc. |
VFK100G-06048 | Valley-todeco, Inc. |
MS21250-06048 | National Aerospace Standards |
MS21250-06048 | Chandler Craftsman Controls |
MS21250-06048 | Military Standards |
MS21250-06048 | Huck Intl Inc |
MS21250-06048 | Huck International, Inc. |
NASM21250 | National Aerospace Standards |
MS21250-06048 | Mercury Aerospace Fasteners Inc |
MS21250-06048 | Allen Mfg Co |
MS21250-06048 | Air World Mfg |
Stock Check
- NS: 113
- NE: 2087
- SV: 1
- AR: 3