NSN 5306-00-508-6599
Close Tolerance Hex Head Bolt
Between 4.009 inches and 4.056 inches fastener length, double hexagon head style, 0.210 inches head height, width between flats: between 0.553 inches and 0.564 inches .
Manufacturer part number 68484-6A58 for national stock number 5306005086599.
Datasheet
-
Product description
Close Tolerance Bolt NSN 5306-00-508-6599.
-
MPN or Model
68484-6A58
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.3 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.374 inches and 0.441 inches -
Fastener Length
Between 4.009 inches and 4.056 inches -
Head Style
Double hexagon -
Head Height
0.210 inches -
Width Between Flats
Between 0.553 inches and 0.564 inches -
Grip Diameter
Between 0.3735 inches and 0.3745 inches -
Thread Diameter
0.375 inches -
Grip Length
Between 3.615 inches and 3.635 inches -
Thready Qty Per Inch (tpi)
24 -
Material
Steel comp h11 -
Material Specification
Ams 6487 assn standard single material response -
Surface Treatment
Nickel and cadmium -
Surface Treatment Specification
Ams 2416 assn standard all treatment responses -
Thread Series Designator
Unjf
More from these suppliers
- 5305-00-508-2691 MPN LS15262V3-19Machine Screw
- 5305-01-103-8817 MPN 3M926-3L4Close Tolerance Screw
- 5305-01-268-0910 MPN BACB30LU4D15Close Tolerance Screw
- 5305-01-406-3075 MPN 3M925C3-11AClose Tolerance Screw
- 5305-01-418-9857 MPN 3M1170D3-2AFClose Tolerance Screw
- 5305-01-600-3666 MPN 3M1275E4D14AMachine Screw
- 5306-00-950-3308 MPN 336C544P2Shoulder Bolt
- 5306-01-044-7447 MPN VAL23607-5-8Shoulder Bolt
An externally threaded fastener whose unthreaded portion is of a specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten-thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads. For items having close tolerance, and fabricated from material having 160,000 pounds per square inch (1100 megapascals) minimum tensile strength, see bolt, shear. For items fabricated from material having less than 160,000 pounds per square inch (1100 megapascals) minimum tensile strength and not having a close tolerance, see bolt, machine.
Pricing and Availability
Get a quote for 5306-00-508-6599 close tolerance boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
68484-6A58 | Sps Technologies, Llc |
VS2978A06U58 | Alcoa Global Fasteners, Inc. |
STSBG000A06U58 | Lockheed Martin Corporation |
VAL23611-6D58 | Valley-todeco, Inc. |
PBF104A6U58 | Sps Technologies, Llc |
68484-6A58 | Sps Technologies, Llc |
AIC2263A06U058 | Sps Technologies, Llc |
BM3200-6A58 | Huck International, Inc. |
11797A06U58 | Reid Products Inc. |
BM3200-4A58 | Aircraft Gear Corp |
BM3200-6A58 | Huck Intl Inc |
AIC2263A06U58 | Sps Technologies, Llc |