NSN 5306-00-182-2011
Wheel Bolt
2.281 inches fastener length, hexagon head style, between 0.109 inches and 0.141 inches head height, width between flats: between 0.365 inches and 0.377 inches .
Manufacturer part number AN3H22A for national stock number 5306001822011.
Datasheet
-
Product description
Machine Bolt NSN 5306-00-182-2011.
-
MPN or Model
AN3H22A
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
2.2 lb -
Thread Class
3a -
Thread Length
0.406 inches -
Fastener Length
2.281 inches -
Head Style
Hexagon -
Head Height
Between 0.109 inches and 0.141 inches -
Width Between Flats
Between 0.365 inches and 0.377 inches -
Thread Diameter
0.190 inches -
Grip Length
1.875 inches -
Features Provided
Finished head -
Thready Qty Per Inch (tpi)
32 -
Min. Tensile Strength (psi)
125000 pounds per square inch -
Hardness Rating
26.0 rockwell c and 32.0 rockwell c -
Material
Steel comp 4037 or steel comp 4130 or steel comp 8630 or steel comp 8735 or steel comp 8740 or steel comp 4140 -
Material Specification
Mil-b-6812 military specification all material responses -
Thread Series Designator
Unf
More from these suppliers
- 5935-00-259-5976 MPN AN3108B20-16PElectrical Plug Connector
- 5935-00-548-0952 MPN AN3106A18-1PElectrical Plug Connector
- 5935-00-549-4497 MPN AN3102E18-1SElectrical Receptacle Connector
- 5975-00-579-5024 MPN AN3066-6Electrical Conduit Locknut
- 5935-00-622-2928 MPN AN3106A20-16SElectrical Plug Connector
- 5935-01-242-5602 MPN AN3106A20-19PElectrical Plug Connector
- 5935-00-299-7814 MPN AN3100A20-7SElectrical Receptacle Connector
- 5935-01-444-1539 MPN AN3100K18-3PElectrical Receptacle Connector
An externally threaded fastener designed for insertion through holes in assembled parts and normally intended to be tightened or released by torquing a nut. the threaded and unthreaded portions are both of one nominal diameter of 0.190 inch (5 mm) or larger. The head is not designed to be held or driven with an inserted driver or by the thumb and fingers. a locking feature may be incorporated in the design of the head or threads. head dimensions and sizes of threaded and unthreaded portions shall conform to internationally recognized fastener standards. for items having a grip length portion machined to a tolerance of 0.0015 inch (0.038 mm) or less, bolt, shear. See also screw, cap, hexagon head and screw, machine.
Pricing and Availability
Get a quote for 5306-00-182-2011 machine boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
AN3H22A | Aeronautical Standards Group |