NSN 5305-00-151-2521
Bolt Stove
Between 0.953 inches and 0.999 inches fastener length, flat countersunk head style, between 0.327 inches and 0.385 inches head diameter, internal drive style: cross recess type 1.
Manufacturer part number AN509-10R15 for national stock number 5305001512521.
Datasheet
-
Product description
Machine Screw NSN 5305-00-151-2521.
-
MPN or Model
AN509-10R15
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.468 inches and 0.484 inches -
Fastener Length
Between 0.953 inches and 0.999 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.327 inches and 0.385 inches -
Internal Drive Style
Cross recess type 1 -
Thread Diameter
0.190 inches -
Thready Qty Per Inch (tpi)
32 -
Min. Tensile Strength (psi)
125000 pounds per square inch -
Hardness Rating
Between 26.0 rockwell c and 32.0 rockwell c -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Screw Material
Steel comp 4130 or steel comp 8630 or steel comp 8735 or steel comp 8740 -
Screw Material Specification
Mil-s-6758 military specification 1st material response or mil-s-6050 military specification 2nd material response or mil-s-6098 military specification 3rd material response or mil-s-6049 military specification 4th material response -
Screw Surface Treatment
Cadmium and chromate -
Screw Surface Treatment Specification
Qq-p-416, type 2, class 3 federal specification all treatment responses -
Thread Series Designator
Unf
More from these suppliers
- 1560-00-182-5042 MPN 1030901Tail Pipe Inlet Stop
- 1560-00-234-9080 MPN 2116336Wing Tip Deicer Strip
- 1560-00-436-3308 MPN 133658Flap Operation Roller
- 5975-00-448-3152 MPN 5116427-2Engine Conduit Assembly
- 1560-00-568-6303 MPN 4243823-1Aircraft Windshield Panel
- 1560-00-574-7308 MPN 5444180-107Skin
- 4920-00-723-6212 MPN 5670362-501Fuel Quant Test Set
- 6145-01-215-3869 MPN STD0087D22-2SJElectrical Special Purpose Cable
An externally threaded fastener whose threaded portion is of one nominal diameter, no 0 (0.060 in./1.5 mm) or larger, designed to be held or driven with either a wrench or an inserted driver or both (excluding internal socket or internal multiple spline types), in sizes below no. 10 (0.190 in./5 mm). No. 10 and larger sizes must have a head designed for any type inserted driver (excluding internal socket or internal multiple spline types), but may also be designed for external wrenching. A locking feature may be incorporated in the design of the head or threads. Excludes bolt, clevis; bolt, externally relieved body; screw, externally relieved body; and screw, assembled washer. See also, screw, instrument; bolt, machine; bolt, internal wrenching; and screw, cap socket head.
Pricing and Availability
Get a quote for 5305-00-151-2521 machine screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
AN509-10R15 | Aeronautical Standards Group |
1029421-10-16 | Boeing Company, The |
AN509-10R15REV2 | Aeronautical Standards Group |
1029421-10-16 | Boeing Company, The |
835150-00 | Defense Reduction Agency |