NSN 5306-00-193-0886
Close Tolerance Hex Head Bolt
Between 1.390 inches and 1.437 inches fastener length, double hexagon head style, between 0.140 inches and 0.172 inches head height, width between flats: between 0.428 inches and 0.440 inches .
Manufacturer part number 3M33-4D15 for national stock number 5306001930886.
Datasheet
-
Product description
Close Tolerance Bolt NSN 5306-00-193-0886.
-
MPN or Model
3M33-4D15
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.442 inches and 0.509 inches -
Fastener Length
Between 1.390 inches and 1.437 inches -
Head Style
Double hexagon -
Head Height
Between 0.140 inches and 0.172 inches -
Width Between Flats
Between 0.428 inches and 0.440 inches -
Grip Diameter
Between 0.2485 inches and 0.2495 inches -
Shank Unthreaded Hole Diameter
0.076 inches first hole and 0.081 inches first hole -
Thread Diameter
0.250 inches -
Grip Length
Between 0.928 inches and 0.948 inches -
Thready Qty Per Inch (tpi)
28 -
Hardness Rating
24.0 rockwell c and 44.0 rockwell c -
Distance From Head Largest Bearing Surface To Shank Hole Center
1.234 inches first hole and 1.266 inches first hole -
Surface Finish
32.0 microinches grip -
Material
Iron alloy 660 -
Material Specification
Ams 5732 assn standard single material response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-01-169-0014 MPN LD111-0047-2306Close Tolerance Screw
- 5305-01-298-1298 MPN BACB30LU404-22Close Tolerance Screw
- 5305-01-331-5809 MPN VCL0009-3-10Close Tolerance Screw
- 5306-00-900-5282 MPN VFK100G-05066Shear Bolt
- 5306-01-010-2346 MPN GB511GF6-17Shear Bolt
- 5306-01-043-5721 MPN VEP220121-5FH12Shear Bolt
- 5306-01-141-7887 MPN VAL23608-5-36Shoulder Bolt
- 5306-01-241-1102 MPN BACB30NE5H13Shear Bolt
An externally threaded fastener whose unthreaded portion is of a specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten-thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads. For items having close tolerance, and fabricated from material having 160,000 pounds per square inch (1100 megapascals) minimum tensile strength, see bolt, shear. For items fabricated from material having less than 160,000 pounds per square inch (1100 megapascals) minimum tensile strength and not having a close tolerance, see bolt, machine.
Pricing and Availability
Get a quote for 5306-00-193-0886 close tolerance boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
3M33-4D15 | Boeing Company, The |
3M33-4D15 | Arconic Global Fasteners & Rings, |
3M33-4D15 | Valley-todeco, Inc. |
3M33-4D15 | Federal Manufacturing Corporation |
3M33-4D15 | Huck International, Inc. |
3M33-4D15 | Sps Technologies, Llc |
3M33-4D15 | Sps Technologies, Llc |
3M33-4D15 | Alcoa Global Fasteners, Inc. |
3M33-4D15 | Textron Fastening Systems |