1-321-802-5889
Email Us

NSN 5306-00-197-3266

Close Tolerance Hex Head Bolt

About this product

Between 2.634 inches and 2.681 inches fastener length, double hexagon head style, 0.210 inches head height, width between flats: between 0.553 inches and 0.564 inches .

Manufacturer part number BM3200-6A036D for national stock number 5306001973266.

Datasheet

  • Product description

    Close Tolerance Bolt NSN 5306-00-197-3266.

  • MPN or Model

    BM3200-6A036D

  • Schedule B
    7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment)
  • NMF (National Motor Freight)
    093486 - Bolts, Nuts Or Screws, NOI (sub 3)
  • Unit Weight (Est.)
    0.1 lb
  • Thread Class
    3a
  • Thread Direction
    Right-hand
  • Thread Length
    Between 0.384 inches and 0.431 inches
  • Fastener Length
    Between 2.634 inches and 2.681 inches
  • Head Style
    Double hexagon
  • Head Height
    0.210 inches
  • Width Between Flats
    Between 0.553 inches and 0.564 inches
  • Grip Diameter
    Between 0.3735 inches and 0.3745 inches
  • Shank Unthreaded Hole Diameter
    0.106 inches first hole
  • Thread Diameter
    0.375 inches
  • Grip Length
    2.250 inches
  • Thready Qty Per Inch (tpi)
    24
  • Min. Tensile Strength (psi)
    132000 pounds per square inch
  • Distance From Head Largest Bearing Surface To Shank Hole Center
    2.501 inches first hole and 2.533 inches first hole
  • Surface Finish
    63.0 microinches grip
  • Material
    Stainless steel
  • Material Specification
    H-11 stsbs000 fscm 98897 mfr ref single material response
  • Surface Treatment
    Nickel and cadmium and chromate
  • Surface Treatment Specification
    Stsbs000 fscm 98897 mfr ref all treatment responses
  • Thread Series Designator
    Unjf
More from these suppliers
Close Tolerance Bolt

An externally threaded fastener whose unthreaded portion is of a specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten-thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads. For items having close tolerance, and fabricated from material having 160,000 pounds per square inch (1100 megapascals) minimum tensile strength, see bolt, shear. For items fabricated from material having less than 160,000 pounds per square inch (1100 megapascals) minimum tensile strength and not having a close tolerance, see bolt, machine.

Mechanic Bill explains Close Tolerance Hex Head Bolt

Pricing and Availability

Get a quote for 5306-00-197-3266 close tolerance bolt
Quantity:
Your Email:
Your Name:
Company Name:
Optional reference:
Phone:
NSN 5306001973266

We do not share, sell, or distribute your information to any third party.
Privacy | Terms

All major credit cards accepted as well as gov. p-cards
Manufacturer Part Numbers and Alternates
MPN manufacturer part number Registrant or Supplier
BM3200-6A036D Huck International, Inc.
68484-6-36 Sps Technologies, Llc
VAL23611-6DS036 Valley-todeco, Inc.
AIC2263A06D036 Sps Technologies, Llc
PBF1041A6D036 Sps Technologies, Llc
VS2978A06D036 Alcoa Global Fasteners, Inc.
11797A06D036 Reid Products Inc.
STSBG000A06D036 Lockheed Martin Corporation
BM3200-6A036D Huck Intl Inc
68484-6-36 Sps Technologies, Llc
Stock Check
Availability of this NSN has not been updated recently. Submit the pricing and availbility form above to receive an up to date quote.