NSN 5306-00-202-0626
Close Tolerance Hex Head Bolt
Between 1.984 inches and 2.031 inches fastener length, hexagon extended washer head style, between 0.172 inches and 0.204 inches head height, width between flats: between 0.552 inches and 0.564 inches .
Manufacturer part number VS2403-6-25 for national stock number 5306002020626.
Datasheet
-
Product description
Close Tolerance Bolt NSN 5306-00-202-0626.
-
MPN or Model
VS2403-6-25
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.412 inches and 0.479 inches -
Fastener Length
Between 1.984 inches and 2.031 inches -
Head Style
Hexagon extended washer -
Head Height
Between 0.172 inches and 0.204 inches -
Width Between Flats
Between 0.552 inches and 0.564 inches -
Extended Washer Diameter
0.546 inches -
Extended Washer Thickness
Between 0.006 inches and 0.026 inches -
Grip Diameter
Between 0.3737 inches and 0.3742 inches -
Shank Unthreaded Hole Diameter
0.105 inches and 0.110 inches first hole -
Thread Diameter
0.375 inches -
Grip Length
Between 1.552 inches and 1.572 inches -
Thready Qty Per Inch (tpi)
24 -
Distance From Head Largest Bearing Surface To Shank Hole Center
1.765 inches and 1.797 inches first hole -
Part Name Assigned By Controlling Agency
Navy special project -
Material
Steel -
Material Specification
Vsm 1521 fscm 92215 mfr ref single material response -
Thread Series Designator
Unf
More from these suppliers
- 5305-00-364-7306 MPN LS15267V3-14Machine Screw
- 5305-01-010-2364 MPN HT4016-4-7XShoulder Screw
- 5305-01-050-9003 MPN VT1693F-5-14Close Tolerance Screw
- 5305-01-062-1057 MPN BACB30RF6P10Close Tolerance Screw
- 5305-01-141-7195 MPN 3M902C5-9AShoulder Screw
- 5305-01-142-8383 MPN HT4041-4-11-5XShoulder Screw
- 5305-01-240-8001 MPN SC1777V06-4LSocket Head Cap Screw
- 5305-01-477-5618 MPN HT4020-4-14AClose Tolerance Screw
An externally threaded fastener whose unthreaded portion is of a specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten-thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads. For items having close tolerance, and fabricated from material having 160,000 pounds per square inch (1100 megapascals) minimum tensile strength, see bolt, shear. For items fabricated from material having less than 160,000 pounds per square inch (1100 megapascals) minimum tensile strength and not having a close tolerance, see bolt, machine.
Pricing and Availability
Get a quote for 5306-00-202-0626 close tolerance boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
VS2403-6-25 | Arconic Global Fasteners & Rings, |
VS2403-6-25 | Alcoa Global Fasteners, Inc. |
VS2403-6-25 | Alcoa Global Fasteners, Inc. |