NSN 5306-00-245-4619
Coaxial Connector
Between 1.893 inches and 1.923 inches fastener length, double hexagon extended washer head style, 0.300 inches head height, width between flats: between 0.304 inches and 0.313 inches .
Manufacturer part number 68486-4-022 for national stock number 5306002454619.
Datasheet
-
Product description
Shear Bolt NSN 5306-00-245-4619.
-
MPN or Model
68486-4-022
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.508 inches and 0.558 inches -
Fastener Length
Between 1.893 inches and 1.923 inches -
Head Style
Double hexagon extended washer -
Head Height
0.300 inches -
Width Between Flats
Between 0.304 inches and 0.313 inches -
Extended Washer Diameter
Between 0.428 inches and 0.438 inches -
Extended Washer Thickness
Between 0.059 inches and 0.079 inches -
Grip Diameter
Between 0.2485 inches and 0.2495 inches -
Thread Diameter
0.250 inches -
Grip Length
Between 0.365 inches and 1.385 inches -
Thready Qty Per Inch (tpi)
28 -
Min. Tensile Strength (psi)
220000 pounds per square inch -
Material
Steel comp h11 -
Material Specification
Stsbs002 98897 mfr ref single material response -
Surface Treatment
Nickel and cadmium and chromate -
Surface Treatment Specification
Stsbs002 98897 mfr ref single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-01-249-5840 MPN 11839V4-12-46Close Tolerance Screw
- 5305-01-394-5977 MPN 11909V4DL4M1Close Tolerance Screw
- 5306-01-025-6434 MPN 11825-4-18Close Tolerance Bolt
- 5306-01-076-3168 MPN ST3M729-10D55Close Tolerance Bolt
- 5306-01-337-4853 MPN 11697A04U011Shear Bolt
- 5320-00-323-6222 MPN TLV200-5-12EPin-rivet
- 5320-01-044-5355 MPN TLV110-3-4EPin-rivet
- 5320-01-091-4610 MPN TL140-7-20Pin-rivet
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-00-245-4619 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
68486-4-022 | Sps Technologies, Llc |
STSBG002A04U022 | Lockheed Martin Corporation |
11695A04U022 | Reid Products Inc. |