NSN 5306-00-443-6800
Coaxial Connector
Between 1.766 inches and 1.796 inches fastener length, double hexagon w/hole head style, between 0.290 inches and 0.310 inches head height, width between flats: between 0.304 inches and 0.313 inches .
Manufacturer part number 68486-4-020 for national stock number 5306004436800.
Datasheet
-
Product description
Shear Bolt NSN 5306-00-443-6800.
-
MPN or Model
68486-4-020
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.506 inches and 0.556 inches -
Fastener Length
Between 1.766 inches and 1.796 inches -
Head Style
Double hexagon w/hole -
Head Height
Between 0.290 inches and 0.310 inches -
Width Between Flats
Between 0.304 inches and 0.313 inches -
Extended Washer Diameter
Between 0.428 inches and 0.438 inches -
Extended Washer Thickness
Between 0.059 inches and 0.079 inches -
Grip Diameter
Between 0.2485 inches and 0.2495 inches -
Thread Diameter
0.250 inches -
Grip Length
Between 1.240 inches and 1.260 inches -
Thready Qty Per Inch (tpi)
28 -
Min. Tensile Strength (psi)
220000 pounds per square inch -
Material
Steel -
Material Specification
H-11 stsbs002 fscm 98897 mfr ref single material response -
Surface Treatment
Cadmium and chromate -
Surface Treatment Specification
Stsbs002 fscm 98897 mfr ref single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-01-102-7956 MPN 11881C4-7DClose Tolerance Screw
- 5305-01-141-7191 MPN 11879C7-23DShoulder Screw
- 5305-01-160-7561 MPN 11923-5-18Close Tolerance Screw
- 5305-01-406-5023 MPN 11855V3-5 118Machine Screw
- 5305-01-406-5023 MPN 11855V3-5 118Machine Screw
- 5305-01-512-8356 MPN 11845C3-8AFClose Tolerance Screw
- 5305-01-513-8895 MPN 11827D4-15AClose Tolerance Screw
- 5305-01-587-2262 MPN 11923-5-14Close Tolerance Screw
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-00-443-6800 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
68486-4-020 | Sps Technologies, Llc |
11695A04U020 | Reid Products Inc. |
STSBG002A04U020 | Lockheed Martin Corporation |