NSN 5306-00-285-9414
Close Tolerance Hex Head Bolt
Between 1.127 inches and 1.174 inches fastener length, double hexagon head style, between 0.130 inches and 0.150 inches head height, width between flats: between 0.367 inches and 0.376 inches .
Manufacturer part number AIC261M3-13 for national stock number 5306002859414.
Datasheet
-
Product description
Close Tolerance Bolt NSN 5306-00-285-9414.
-
MPN or Model
AIC261M3-13
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.305 inches and 0.372 inches -
Fastener Length
Between 1.127 inches and 1.174 inches -
Head Style
Double hexagon -
Head Height
Between 0.130 inches and 0.150 inches -
Width Between Flats
Between 0.367 inches and 0.376 inches -
Grip Diameter
Between 0.1885 inches and 0.1895 inches -
Thread Diameter
0.190 inches -
Grip Length
Between 0.802 inches and 0.822 inches -
Thready Qty Per Inch (tpi)
32 -
Material
Steel -
Surface Treatment
Cadmium -
Surface Treatment Specification
Ps13145, fscm 76301 mfr ref single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-00-725-5911 MPN AIC813-4-R16Machine Screw
- 5305-00-928-9646 MPN AIC82-4-20Machine Screw
- 5305-01-004-9497 MPN AIC813-06R16Machine Screw
- 5305-01-054-6243 MPN C9535-7-13Close Tolerance Screw
- 5305-01-240-1278 MPN C7984-3-11Close Tolerance Screw
- 5305-01-240-2649 MPN AIC4038E6-06Machine Screw
- 5305-01-381-2351 MPN AIC818-08-103CSocket Head Cap Screw
- 5305-01-452-6111 MPN LD111-0046-2419Close Tolerance Screw
An externally threaded fastener whose unthreaded portion is of a specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten-thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads. For items having close tolerance, and fabricated from material having 160,000 pounds per square inch (1100 megapascals) minimum tensile strength, see bolt, shear. For items fabricated from material having less than 160,000 pounds per square inch (1100 megapascals) minimum tensile strength and not having a close tolerance, see bolt, machine.
Pricing and Availability
Get a quote for 5306-00-285-9414 close tolerance boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
AIC261M3-13 | Sps Technologies, Llc |
66051-3-13 | Sps Technologies Inc Unbrako Div |
3M261-3-13 | Boeing Company, The |