NSN 5306-00-288-2196
Coaxial Connector
Between 0.632 inches and 0.662 inches fastener length, double hexagon w/hole head style, between 0.265 inches and 0.285 inches head height, width between flats: between 0.243 inches and 0.251 inches .
Manufacturer part number BM3326-3-4 for national stock number 5306002882196.
Datasheet
-
Product description
Shear Bolt NSN 5306-00-288-2196.
-
MPN or Model
BM3326-3-4
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.372 inches and 0.422 inches -
Fastener Length
Between 0.632 inches and 0.662 inches -
Head Style
Double hexagon w/hole -
Head Height
Between 0.265 inches and 0.285 inches -
Width Between Flats
Between 0.243 inches and 0.251 inches -
Extended Washer Diameter
Between 0.340 inches and 0.350 inches -
Extended Washer Thickness
Between 0.054 inches and 0.074 inches -
Grip Diameter
Between 0.1890 inches and 0.1895 inches -
Thread Diameter
0.190 inches -
Grip Length
Between 0.240 inches and 0.260 inches -
Thready Qty Per Inch (tpi)
32 -
Min. Tensile Strength (psi)
220000 pounds per square inch -
Material
Stainless steel -
Surface Treatment
Passivate -
Thread Series Designator
Unjf
More from these suppliers
- 5305-01-136-7149 MPN BACB30LU5-8Close Tolerance Screw
- 5305-01-462-2693 MPN 3M1034C6-14-51Close Tolerance Screw
- 5305-01-600-3667 MPN 3M1275E4D13AMachine Screw
- 5306-00-201-5628 MPN VAL23001-6D030Bolt
- 5306-01-076-4880 MPN BACB30PU10-40Shoulder Bolt
- 5306-01-130-6562 MPN VCG0002-6-24Close Tolerance Bolt
- 5306-01-152-4698 MPN BACB30NF7-19Shear Bolt
- 5306-01-383-9663 MPN VCG0030-9-72Close Tolerance Bolt
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-00-288-2196 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
BM3326-3-4 | Huck International, Inc. |
S371-3-4 | Huck International, Inc. |
VAL23033-3-4 | Valley-todeco, Inc. |
AIC752-3-4 | Sps Technologies, Llc |
S11-1059-3-4 | Sonic Industries Inc. |
74328-3-4 | Sps Technologies, Llc |
MB84-3-4 | Hi-shear Corporation |
VS3060-3-4 | Arconic Global Fasteners & Rings, |
NAS1100E02-3 (A) | National Aerospace Standards |
MB84-3-4 | Lisi Aerospace Canada Corp |
ST3M571-3-4 | Boeing Company, The |
ST3M571-3-4 | Sps Technologies, Llc |
BM3326-3-4 | Huck Intl Inc |
S371-3-4 | Huck Intl Inc |
10114223 | Nimikkeistokeskus Ncb Finland |
VS3060-3-4 | Alcoa Global Fasteners, Inc. |
74328-3-4 | Sps Technologies, Llc |